North Tyneside · England
Bath re-enamelling & resurfacing in Holystone, North Tyneside
Full bath re-enamelling and resurfacing for homes and businesses in Holystone and across North Tyneside. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
About our bath re-enamelling in Holystone
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Typical jobs include several chips and rust patches and brown or grey marks that don’t clean off, in pressed steel baths, Victorian roll-tops and cast iron baths.
Whatever the size of the job, you get the same one-year guarantee in Holystone and across North Tyneside.
- Area
- Holystone (NE27, NE12, NE28)
- Region
- North Tyneside
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Holystone
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Questions from Holystone
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is repairing better than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you quote from pictures?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Repair or replace in Holystone?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there’s no premium for Holystone. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
- Colour mixed on the day to match
- No need to remove anything
Take a look at our pricing or guide to resurfacing and replacement costs.
How to look after the repair
Once the work has cured, treat it gently:
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
- A quick wipe after use keeps limescale away
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Do you need bath re-enamelling in Holystone?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
You may need us if you’ve spotted:
- A period or roll-top bath worth keeping
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
- An old resurfacing that’s failing
What to look for in a quote
- How changes to the job are handled
- If travel is included in the price
- A fixed price, and whether VAT is included
- Who will actually do the work
Towns and villages near Holystone
Other services in Holystone
How the visit works
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to a full day, including clearing up.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Keep a parking space free if you can
- Ensure the area is dry
- Tell us if there are stairs or a lift
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Holystone. What changes the price is:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- How many areas need work
- What the surface is made of
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
- A close-up of the damage, in focus
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Holystone and nearby
Holystone is about 2 miles east of Longbenton, in North Tyneside. Across the NE27 area, we come to you. We cover all 30 towns and villages in North Tyneside.
Jobs in NE27, NE12 and NE28 are booked in the same way as anywhere else. From Edmund Road, St Aidan's Avenue and Wesley Way or a nearby road, a technician can come to you. Other places close to Holystone include West Allotment (1 mile north-east), Backworth (1 mile north), Shiremoor (1 mile north-east), Northumberland Park (2 miles west) and Longbenton (2 miles west). Further out, we also cover Tynemouth (3 miles east), Whitley Bay (3 miles north-east), North Shields (3 miles east), Cullercoats (4 miles east), Chirton (3 miles south-east) and Preston (3 miles east).
Around Holystone
We visit homes around Churchill Community College, Tyne Metropolitan College and The Blue Bell pub. Nearby too are Holystone Primary School (less than half a mile north-east) and St Mark (1.1 miles north-east). The nearest railway station is Northumberland Park (Tyne and Wear) station, about 0.6 miles north-east of the centre. Other landmarks nearby include Silverlink Shopping Park (1.6 miles south-east) and Longbenton Urban District (1.7 miles west). Open spaces near Holystone include Bent Hill.
About our accreditations · Every repair comes with a one-year guarantee.
