Greater London · England
Bath Re-enamelling in Honor Oak
Full bath re-enamelling and resurfacing for homes and businesses in Honor Oak and across Greater London. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A coloured bath you want in white
- A peeling or bubbling previous coating
Signs you need bath re-enamelling in Honor Oak
Many baths we resurface have simply been well used. The body of the bath is normally perfectly sound.
It’s worth getting a quote if you see:
- An outdated colour you’d like to change
- An old resurfacing that’s failing
- Stains that will not shift
- Wear marks under the taps
Comparing quotes
- How the room is protected while they work
- How long the guarantee is and what it covers
- How to care for the finish
- Whether they match the colour on site
Bath re-enamelling in Honor Oak, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We are often asked to fix stains that won’t shift and an outdated colour you’d like to change, in basins & shower trays, pressed steel baths and cast iron baths.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Honor Oak (SE23, SE22, SE4)
- Area hub
- Greater London
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
A repair is not always the answer, and we’d rather say so up front. We can’t fix:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Also near Honor Oak
More services for Honor Oak
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
What you get with us
- Same prices wherever you are
- Rooms protected and left tidy
- No need to remove anything
- Colour mixed on the day to match
Take a look at our prices page or resurfacing vs replacement cost guide.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Honor Oak. The price comes down to:
- Where the damage is and how we get to it
- What kind of damage it is
- How many areas need work
- Whether old repairs or coatings need taking off
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
Good pictures mean an accurate price. Here’s what helps:
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- The material, if you know it
To get a price, send two or three photos using our quote form or call us. We will say straight away if a repair is the right fix.
Aftercare tips
How the surface is treated afterwards matters:
- Store bottles off the bath
- Never use suction bath mats
- Respect the curing time we give you
- Do not let dyes or oils sit on the finish
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. It generally takes most of the day, and you are welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Let the surface dry out before the visit
- Clear the area around the damage
- Tell us about any previous repairs or coatings
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Read more
Questions from Honor Oak
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Do you work in Honor Oak?
Yes. We cover the entire UK and come to Honor Oak. Send photos and we will quote, or call 0345 017 0787.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Where we work around Honor Oak
Honor Oak is about 2 miles south-west of New Cross, in Greater London. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 764 towns and villages in Greater London, from the larger towns to small villages.
Our visits in SE23, SE22 and SE4 work the same way as everywhere else we cover. Local streets include Rye Road, Ewart Road and Bovill Road. We also cover the places around Honor Oak: Forest Hill (1 mile south), Brockley (1 mile east), Crofton Park (1 mile east), Nunhead (1 mile north) and Telegraph Hill (1 mile north). Within a short drive, we also cover London (4 miles north-west), City of Westminster (6 miles north-west), Marylebone (6 miles north-west), Kensington (7 miles north-west), St Pancras (6 miles north-west) and Shoreditch (5 miles north).
Around Honor Oak
Our customers here include homes close to Harris Girls' Academy East Dulwich, Church of St Augustine and Allenby Tutorial Trust, among other places. Also close by are Herne Tavern (0.5 miles north-west), Peckham Rye (0.7 miles north-west) and St Francesca Cabrini Primary School (less than half a mile south). There is a railway station in Honor Oak itself: Honor Oak Park station. Other landmarks nearby include Greenwich Castle (2.9 miles north-east) and Nunhead (1.2 miles north). Not far away are One Tree Hill and Battersea Park Lake.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
