Plymouth · England

Bath Re-enamelling in Hooe

Damaged bath in Hooe? We put it right where it is, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Hooe?

About our bath re-enamelling in Hooe

Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Common call-outs are for enamel that’s lost its shine and feels rough and an outdated colour you’d like to change, in pressed steel baths, acrylic baths and cast iron baths.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Hooe (PL9, PL4)
County
Plymouth
Cover
12 months on all our work
Quotes
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

When to call us in Hooe

In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.

You may need us if you’ve spotted any of these:

  • Chips and rust in more than one place
  • A period or roll-top bath worth keeping
  • Stains that will not shift
  • An old resurfacing that is failing

What to look for in a quote

  • Whether a trained technician does the job
  • What happens if the damage is worse than the photos show
  • How soon you can use it again
  • Whether there are any call-out or travel charges

Choosing a repair company

DIY kit or professional repair?

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

The process

We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take the best part of a day, and we leave the room as we found it.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Preparing for the visit

  • Point us to the nearest place to park
  • Let us know which floor the room is on
  • Open a window if you can

Ask for a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.

Get a free quote

Read more

Where we work around Hooe

Hooe is about 3 miles south-east of Stonehouse, in Plymouth. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. Hooe is one of 59 towns and villages in Plymouth where we work.

We work across PL9 and PL4. Local streets include Lake Road, Hooe Road and Park Lane, all of which we cover. Other places close to Hooe include Turnchapel (1 mile north-west), Oreston (1 mile north), Cattedown (1 mile north-west), Down Thomas (2 miles south) and Hoe (2 miles north-west). Within a short drive, we also cover Plymouth (3 miles north), North Prospect (3 miles north-west), Stoke (3 miles north-west), Peverell (3 miles north-west), Ford (3 miles north-west) and Ham (4 miles north-west).

Near you in Hooe

Our customers here include homes close to Church of St John, Plymouth Hoe and Hooe Primary Academy and the streets around them. You will also find Plymstock Library (1.2 miles north-east), Plymstock School (1.3 miles north-east) and Victoria Inn (within half a mile east). The closest station to Hooe is Plymouth station, about 2.2 miles north-west of the centre. Other landmarks nearby include Drake Circus Shopping Centre (1.7 miles north-west) and Mount Gould Hospital and Local Care Centre (1.8 miles north). Green spaces nearby include Penlee Battery.

Map of Hooe © OpenStreetMap contributors

What a repair can’t fix

A repair isn’t right for every job, for example:

  • A bath split right through the body
  • Acrylic that moves when you stand in it
  • Problems we can’t see until an old finish comes off

Not sure? Send photos and we’ll give you a straight answer before booking.

Surfaces we repair

  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths

How to look after the repair

Looking after the surface is easy, and it makes a real difference:

  • Dry the bath after use to stop limescale
  • Stick to gentle, non-abrasive cleaners
  • Do not let dyes or oils sit on the finish
  • Fix dripping taps quickly

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

What affects the price in Hooe

Prices start from £350. We do not charge extra for travel to Hooe. The price depends on:

  • Any earlier repairs that need removing first
  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes
  • The material

We charge the same wherever you are, with no extra for Hooe. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Getting a price from pictures

We price nearly every job from photos. This is what we need:

  • A coin or ruler next to the damage for scale
  • Where you are, by postcode
  • Natural light rather than flash
  • A picture taken from further back

Send us photos of the damage and one of the entire item, and tell us you are in Hooe, and we’ll come back with a fixed quote.

Materials and what they mean for the repair

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Landlords, agents and businesses in Hooe

We work for landlords, letting agents and housing providers in Hooe as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Housing associations and facilities teams use us for planned and reactive repairs in Plymouth and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Your questions about bath re-enamelling in Hooe

Are there extra charges for Hooe?

Travel is included in the price, with the same prices everywhere we work.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Hooe.

How long does re-enamelling take?

One day for most baths and can be used the day after. We give you timings with the quote.

What happens after I send photos?

We review the pictures and send a fixed quote.

Do you come to Hooe?

Yes. We work across the UK and come to Hooe and the rest of Plymouth. Send photos and we’ll quote, or call 0345 017 0787.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside.

Is repairing better than replacing?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.