Plymouth · England
Bath re-enamelling & resurfacing in Stoke, Plymouth
We travel to Stoke for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
Stoke questions
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send pictures.
How much does bath re-enamelling cost in Stoke?
Prices start from £350. We give a fixed quote from your pictures. Send a close-up and a photo of the whole item with your PL2 postcode.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Bath re-enamelling in Stoke, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. If you’re dealing with stains that won’t shift and worn patches where water runs and sits, we can generally put it right, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Stoke (PL2, PL1, PL3)
- Region
- Plymouth
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Towns and villages near Stoke
More services for Stoke
For landlords and businesses
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
What we’re called out for in Stoke
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.
Keep an eye out for these signs:
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
- A peeling or bubbling previous coating
- Brown or grey marks that don’t clean off
What your quote should include
- Whether the colour is mixed to match
- Aftercare advice
- What happens if the damage is worse than the pictures show
- What protection goes down before work starts
Honest limits
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- A bath that’s rusted through
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow the best part of a day. Before leaving, we tell you how long to leave it and how to look after it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the following day.
Before we arrive
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
- Open a window if you can
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Advice
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- Nothing taken out or refitted
Read our prices page and resurfacing vs replacement cost guide.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- How many areas need work
- How many items we do on one visit
- Any earlier repairs that need removing first
- The material and finish
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
How to get a fixed price
When you take your pictures, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- A picture taken from further back
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Where we work around Stoke
Stoke is about 2 miles west of Plymouth, in Plymouth. Customers in Stoke get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in all 59 towns and villages in Plymouth, from the larger towns to small villages.
Our visits in PL2, PL1 and PL3 are booked in the same way as anywhere else. Streets in the area include Alma Road, Ryder Road and Oates Road, and we cover them all. We also travel to Ford (1 mile east), Millbridge (1 mile south-east), Milehouse (1 mile north-east), Stonehouse (1 mile south) and Keyham (1 mile north-west). Larger places within reach include Burraton (4 miles north-west), Plympton St Maurice (6 miles east), Plymstock (4 miles south-east), Sherford (5 miles east), St Stephens (4 miles north-west) and Eggbuckland (3 miles north-east). Stoke is among the bigger towns we cover in Plymouth.
What’s near Stoke
We visit homes around Church of St Andrew, Stoke Damerel Primary School and Stoke Inn, among other places. Nearby too are Devonport Library (0.8 miles south-west), Stoke Damerel Community College (under half a mile north-east), Victoria Park (0.5 miles south-east) and City College Plymouth (0.5 miles south). There’s a railway station in Stoke itself: Devonport station. Well-known places in the area include Elizabethan House Museum (1.5 miles south-east) and Plymouth Castle (1.6 miles south-east). Not far away are Penlee Battery.
About our accreditations · Every repair comes with a one-year guarantee.
