Staffordshire · England
Bath re-enamelling & resurfacing in Horsebrook, Staffordshire
Bath re-enamelling in Horsebrook without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- A coating lifting around the plughole
- Wear marks under the taps
When we would advise against a repair
A repair isn’t always the answer, and we will tell you before we start. Repairs won’t solve:
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
How we handle bath re-enamelling in Horsebrook
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. We’re frequently asked to fix brown or grey marks that don’t clean off and a bath that stays dull however much you clean it, across acrylic baths, pressed steel baths and cast iron baths.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Horsebrook (ST19)
- County
- Staffordshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Horsebrook questions
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
How long will the bath be out of use?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Horsebrook.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Repair or replace in Horsebrook?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. You will see the full price before booking, with nothing added on the day.
What you get with us
- Fixed prices from your photos
- Straight answers about what a repair can do
- No need to remove anything
- Colours mixed by hand to suit your surface
Take a look at our pricing or bath cost comparison.
Towns and villages near Horsebrook
Other services in Horsebrook
When to call us in Horsebrook
Often the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.
Most people get in touch after spotting one of these:
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
- An old resurfacing that’s failing
- A dull, rough surface that won’t come clean
Questions to ask before you book
- How soon you can use it again
- What aftercare is recommended
- How the colour is matched
- Whether cleaning and preparation are in the price
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Horsebrook and the surrounding area
Horsebrook is about 6 miles west of Cannock, in Staffordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 512 places across Staffordshire. Our jobs stretch from Horsebrook to Birmingham (about 19 miles away).
Postcode districts we cover here: ST19. Streets in the area include Ivy House Lane, Cobbler's Bank and Horsebrook Hall Lane, and we cover them all. Other places close to Horsebrook include Somerford (1 mile south-east), Brewood (1 mile south), Crateford (1 mile south-east), Gailey (2 miles east) and Four Ashes (2 miles south-east). Within a short drive, we also cover Stafford (8 miles north), Cannock (6 miles east), Lichfield (14 miles east), Rugeley (11 miles north-east), Burntwood (10 miles east) and Stone (14 miles north).
Landmarks near Horsebrook
Our clients here include homes close to The Rural Enterprise Academy, St John's Church and St Mary's Catholic Primary School, among other places. The closest station to Horsebrook is Penkridge station, roughly 2.9 miles north-east. Other landmarks nearby include Cannock Chase Hospital (5.7 miles east).
Looking after it afterwards
Looking after the surface is easy:
- Dry the bath after use to stop limescale
- Fix dripping taps quickly
- Don’t leave a chip unrepaired
- Leave the bath for the full curing time before using it
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What we do, step by step
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and we start. It normally takes most of the day, and we’ll tell you if anything changes.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Ensure the area is dry
Get a quote
The quickest way to a price is to send a couple of pictures through our quote form or call us. We will say immediately if a repair is the right fix.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
