Staffordshire · England
Bath Re-enamelling in Brewood
Local bath re-enamelling for Brewood: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- Enamel that is lost its shine and feels rough
Keeping it looking good
After the repair has cured, a few habits help it last:
- Don’t leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- Never use suction bath mats
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our bath re-enamelling in Brewood
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We regularly repair basins & shower trays, cast iron baths and Victorian roll-tops, and people most often call us about a dull, rough surface that won’t come clean and a coloured bath you want in white.
All of our repairs are guaranteed for twelve months in Brewood and everywhere else. If something goes wrong with the work, we come back.
- Where
- Brewood (ST19)
- Area hub
- Staffordshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which usually takes the best part of a day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
Get a quote
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
Brewood questions
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Do you work in Brewood?
We do. We send a technician to Brewood for every job, and the price is the same as everywhere else.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a picture of the entire item with your ST19 postcode.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Do you cover the entire of Staffordshire?
We cover the whole UK, including Brewood and the rest of Staffordshire. Send your postcode with your photos and we will offer you dates.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Landlord and trade work in Brewood
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, with the bath back in use the next day. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with nothing added on the day.
Why Brewood clients choose us
- Same prices wherever you are
- We will tell you if it’s not worth repairing
- Free fixed quotes from pictures
- Colours mixed by hand to suit your surface
Read our prices page or resurfacing vs replacement cost guide.
Nearby places to Brewood
More services for Brewood
Signs you need bath re-enamelling in Brewood
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- An outdated colour you’d like to change
- Wear marks under the taps
- Staining under the taps and around the waste
- An old resurfacing that’s failing
Questions to ask before you book
- How soon you can use it again
- Whether the colour is mixed to match
- How your room will be protected
- What preparation is included
When we’d advise against a repair
A repair isn’t always the answer, and we’ll tell you before we start. We can’t fix:
- A bath that is rusted through
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
How we price bath re-enamelling
Prices start from £350. You will not pay by the hour. The price depends on:
- The colour and finish to match
- Any earlier repairs that need removing first
- The type of damage
- Doing more than one item at once
A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
We price nearly every job from photos. This is what to send:
- Any details about the material
- Your postcode, so we can check dates
- One sharp close-up of the damage
- A wider photo showing the whole bath
For a price in Brewood, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Our work in Brewood
Brewood is about 6 miles north of Wolverhampton, in Staffordshire. From the centre of Brewood to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 512 towns and villages in Staffordshire, from the larger towns to small villages. Our jobs stretch from Brewood to Birmingham (18 miles away).
Every address in ST19 is covered, from the main roads to the quietest streets. Streets in the area include Market Place, Church Road and Deansfield Road, and we cover them all. Nearby, we also work in Somerford (1 mile north-east), Horsebrook (1 mile north), Crateford (1 mile east), Coven (2 miles south-east) and Standeford (2 miles south-east). Larger places within reach include Stafford (9 miles north), Cannock (7 miles east), Lichfield (14 miles east), Rugeley (11 miles north-east), Burntwood (10 miles east) and Stone (15 miles north).
Local landmarks in Brewood
Typical jobs here are in homes near Church of St Mary and St Chad and St Mary and St Chad CE (VC) First School. The closest station to Brewood is Codsall station, about 3.7 miles south. A little further out are RAF Hospital Cosford (5.3 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
