West Lothian · Scotland

Bath re-enamelling & resurfacing in Howden, West Lothian

Fixed-price bath re-enamelling in Howden and the surrounding area, done in a single visit in most cases.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Howden?

For landlords and businesses

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

We carry out planned and one-off repairs for housing associations and facilities teams in West Lothian and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Bath re-enamelling in Howden without replacing anything

Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We regularly repair cast iron baths, acrylic baths and basins & shower trays, and people most often call us about stains that won’t shift and thin, worn enamel in places.

You’re covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.

Stained basin resurfaced to clean white (before and after)
Where
Howden (EH54)
Area hub
West Lothian
Cover
One year on every repair
Quote
From £350. Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026

What affects the price in Howden

Prices start from £350. You will know the full cost before booking. We take into account:

  • How many areas need work
  • The type of damage
  • Doing more than one item at once
  • Whether old repairs or coatings need taking off

The price reflects the work involved, not your postcode. The full price is agreed before booking.

Send pictures for a quote

It only takes a minute to photograph the damage. Try to send:

  • Any details about the material
  • A close-up of the damage, in focus
  • Whether it’s been repaired or coated before
  • A coin beside the damage so we can judge size

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Do you need bath re-enamelling in Howden?

Hard water speeds up the wear, and gritty cleaners are the worst culprits.

If you can see any of these, send us a picture:

  • An original cast iron bath that needs restoring
  • Wear marks under the taps
  • Staining under the taps and around the waste
  • A coloured bath you want in white

Questions to ask before booking

  • Whether they match the colour on site
  • Is the price fixed, and does it include VAT?
  • Who turns up on the day
  • When it can be used again

10 questions to ask before booking

Aftercare tips

Aftercare is simple:

  • A quick wipe after use keeps limescale away
  • Use washing-up liquid and a soft cloth
  • Have chips seen to early
  • Store bottles off the bath

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.

On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

Can I fix it myself?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

Where we work around Howden

Howden is about 1 mile south of Livingston, in West Lothian. Jobs in Howden are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Howden is one of 58 places in West Lothian where we work. You can also see our page for Edinburgh, about 13 miles away.

Every address in EH54 is within our area. We regularly work on streets such as Allen Road, Huron Avenue and Cousland Road. Close by, we cover Livingston (1 mile north), Ladywell (1 mile north-west), Livingston Village (1 mile west), Dedridge (1 mile south) and Eliburn (1 mile west). Within a short drive, we also cover Bathgate (5 miles west), Linlithgow (7 miles north-west), Whitburn (7 miles west), East Calder (3 miles east), Broxburn (3 miles north-east) and Armadale (7 miles west).

Around Howden

Around Howden, we work in homes near Inveralmond Community High School, St. Margaret's Academy and The NewYearField pub, among other places. For rail, the closest station is Livingston North station, about 1.2 miles north-west of the centre. Well-known places in the area include Almond Valley Heritage Centre (1.2 miles west) and Illieston Castle (3.5 miles north-east). Green spaces nearby include Dechmont Law.

Map of Howden © OpenStreetMap contributors

FAQs for Howden

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

How long does re-enamelling last?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.

Which areas do you work in?

Everywhere in the UK, Howden included. There is no extra charge for travel.

Can you redo someone else’s repair?

Yes, we frequently do. It can add a little time, which we include in the quote.

Do you need to take the bath out?

No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.

Can you re-enamel a roll-top bath?

Yes. We can do the inside and outside.

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

When a repair isn’t the answer

Some problems need a builder, plumber or fitter rather than us:

  • Holes rusted through the metal
  • Acrylic that moves when you stand in it
  • Leaking taps or wastes (a plumber’s job)

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths

What we do, step by step

We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to care for it.

  1. We mask and protect the room and ventilate it.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We prepare the surface and apply a bonding primer.
  4. We spray several coats of new enamel finish.
  5. We leave it to cure, and it’s usually ready the day after.

How to prepare

  • Open a window if you can
  • Keep pets and children out of the room while we work
  • Avoid using the area for a few hours before we arrive

Get a quote

The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll say immediately if a repair is the right fix.

Get a free quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.