Kent · England

Bath Re-enamelling for Howt Green homes

Full bath re-enamelling and resurfacing at your home in Howt Green, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Howt Green

What we do, step by step

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, and we finish by cleaning up and talking you through the result.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can normally be used the next day.

Preparing for the visit

  • Have a window or extractor fan available
  • Tell us about parking, stairs or access
  • Tell us about any previous repairs or coatings

Getting a price

To get a price, send a couple of pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a fixed quote

Related advice

Bath re-enamelling in Howt Green, done in place

We do not move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the following day. If you’re dealing with lots of chips and rust spots and brown or grey marks that don’t clean off, we can help, whatever the material.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Roll-top bath being refinished by a Surface Doctor technician
Area
Howt Green (ME9)
County
Kent
Warranty
A year, on every repair
Price
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026

Repairs by material

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.

What a repair cannot fix

A repair isn’t always the answer, and we’ll tell you before we start. Repairs won’t solve:

  • A metal bath with a through crack
  • A bath that’s rusted through
  • Leaking taps or wastes (a plumber’s job)

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

About Howt Green

Howt Green is about 1 mile north-west of Sittingbourne, in Kent. Jobs in Howt Green are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Our repair technicians cover 922 places across Kent. You can also see our page for London, about 36 miles away.

We cover every part of ME9. Neighbouring places we cover include Kemsley (1 mile east), Iwade (1 mile north), Sittingbourne (1 mile south-east), Milton Regis (1 mile south-east) and Murston (2 miles south-east). We also work in nearby towns such as Maidstone (11 miles south-west), Whitstable (13 miles east), Faversham (8 miles south-east), Minster (5 miles north-east), Kings Hill (15 miles south-west) and Davington (8 miles south-east).

Local landmarks in Howt Green

We visit homes around Church of St Bartholomew, Westlands School and Milton Creek Country Park. Other local landmarks include Regis Manor Primary School (0.7 miles south-east) and The Three Hats Inn (0.9 miles south-east). Howt Green’s nearest station is Kemsley station, roughly 0.6 miles east of the centre. Nearby you will also find Court Hall Museum (0.9 miles south-east) and Castle Rough (1.4 miles east).

  • Other local spots include Sittingbourne and Milton Urban District (0.9 miles south-east)
Map of Howt Green © OpenStreetMap contributors

Common problems we fix in Howt Green

Often the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.

It’s worth getting a quote if you see:

  • A roll-top that’s seen better days
  • Enamel that is lost its shine and feels rough
  • A peeling or bubbling previous coating
  • Thin, worn enamel in places

Comparing quotes

  • Whether a trained technician does the job
  • Whether the price covers travel
  • Aftercare advice
  • When it can be used again

Our hiring checklist

Questions from Howt Green

What do you need from me?

A close-up, a wider photo and your postcode. Then we will agree a date.

Can you re-enamel a roll-top bath?

Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

Someone resurfaced my bath and it’s peeling. Can you help?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

Is there any odour?

There may be a mild smell during the work.

Can you quote from pictures?

Nearly always. We only ask to see it in person if the pictures can’t show what we need.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Keeping it looking good

After the repair has cured, a few habits help it last:

  • A quick wipe after use keeps limescale away
  • Wash away dyes and oils after use
  • Have chips seen to early
  • Avoid suction-cup mats

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Why repair rather than replace?

There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.

Why book with us

  • One visit for most repairs
  • Free fixed quotes from pictures
  • Colour mixed on the day to match
  • Everything repaired in place

Read our prices page and resurfacing vs replacement cost guide.

Work for landlords and builders

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.