Kent · England
Bath re-enamelling & resurfacing in Kemsley, Kent
Full bath re-enamelling and resurfacing in Kemsley, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Thin, worn enamel in places
Repairing versus replacing in Kemsley
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the entire surface without moving it. Prices start from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- One visit for most repairs
- Technicians who travel to you, UK-wide
- Straight answers about what a repair can do
- One-year guarantee on every repair
Read our prices page or resurfacing vs replacement cost guide.
How we handle bath re-enamelling in Kemsley
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include a bath in a colour that no longer suits and worn patches where water runs and sits, in acrylic baths, Victorian roll-tops and basins & shower trays.
Big or small, you get the same one-year guarantee in Kemsley and across Kent.
- Area
- Kemsley (ME10, ME9)
- County
- Kent
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
We’ll always be straight with you, so here’s what a repair won’t do:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- A bath that is rusted through
Send us pictures and we will tell you honestly.
What we work on
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- What the surface is made of
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- Doing more than one item at once
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Send pictures for a quote
Most quotes are done from pictures alone. To help us price it:
- A coin beside the damage so we can judge size
- A photo taken from further back
- Any details about the material
- Good light, ideally daylight, without flash glare
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Places near Kemsley
Other services in Kemsley
Your questions about bath re-enamelling in Kemsley
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Do you work in Kemsley?
Yes, we do. We send a technician to Kemsley for every job, with no extra charge for travel.
How do I get a price for bath re-enamelling in Kemsley?
Resurfacing from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
For landlords and businesses
For anyone letting property in or around Kemsley, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Kemsley and the surrounding area
Kemsley is about 1 mile north of Sittingbourne, in Kent. Customers in Kemsley get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Kemsley is one of 922 towns and villages in Kent we cover. We work right across the region, from Kemsley to London (37 miles away).
All of ME10 and ME9 is within our area. From Court Road, Menin Road and Hurst Lane or anywhere nearby, a technician can come to you. Close by, we cover Howt Green (1 mile west), Milton Regis (1 mile south-east), Sittingbourne (1 mile south), Iwade (1 mile north-west) and Murston (1 mile south). Further out, we also cover Maidstone (11 miles south-west), Whitstable (13 miles east), Faversham (7 miles south-east), Minster (5 miles north-east), Davington (7 miles south-east) and Foley Park (10 miles south-west).
Landmarks near Kemsley
Around Kemsley, we work in homes near Milton Creek Country Park, Parish Church of the Holy Trinity and The Three Hats Inn. You will also find Borden Grammar School (1.6 miles south) and Kemsley Primary Academy (less than half a mile north-east). Kemsley has its own railway station: Kemsley station. Well-known places in the area include Castle Rough (0.6 miles east) and Court Hall Museum (0.8 miles south-west).
- Parks and local facilities nearby include Sittingbourne and Milton Urban District (0.8 miles south-west)
Common problems we fix in Kemsley
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Common reasons people in Kemsley contact us are:
- Lots of chips and rust spots
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
What to look for in a quote
- How long it needs to cure
- Whether there are any call-out or travel charges
- Who turns up on the day
- The length of the guarantee and what it covers
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a full day, and you can get on with other things while we are there.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Before we arrive
- Mention any parking restrictions or tricky access
- Open a window if you can
- Keep children and pets away from the room on the day
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
