County Durham · England
Bath Re-enamelling in Hummerbeck
Problem with your bath in Hummerbeck? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Rinse off hair dye, oils and bath bombs immediately
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
- Have chips seen to early
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Bath re-enamelling in Hummerbeck without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We regularly repair acrylic baths, cast iron baths and pressed steel baths, and people most frequently call us about a bath that stays dull however much you clean it and an original cast iron bath that needs restoring.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Area
- Hummerbeck (DL14)
- County
- County Durham
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Hummerbeck: your questions answered
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How do I get a price for bath re-enamelling in Hummerbeck?
Resurfacing from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
Is repairing better than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Will the price change on the day?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
Signs you need bath re-enamelling in Hummerbeck
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Send us a picture if you notice any of these:
- A roll-top that is seen better days
- Wear marks under the taps
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Questions to ask before you book
- How long it needs to cure
- Who turns up on the day
- If travel is included in the price
- A fixed quote, and whether VAT is included
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Landlords, letting agents and housing providers in Hummerbeck use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Why repair rather than replace?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- One price list for the entire UK
- Most jobs done in one visit
- Work done at your home or business
- Nothing taken out or refitted
Take a look at our pricing or resurfacing vs replacement cost guide.
Also near Hummerbeck
Other services in Hummerbeck
Our work in Hummerbeck
Hummerbeck is about 2 miles south-west of Bishop Auckland, in County Durham. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in all 329 towns and villages across County Durham, from the larger towns to small villages. Our jobs stretch from Hummerbeck to Newcastle upon Tyne (25 miles away).
Jobs in DL14 work the same way as everywhere else we cover. Nearby, we also work in West Auckland (1 mile north-west), St Helen Auckland (1 mile north), Evenwood Gate (2 miles south-west), Etherley Dene (2 miles north) and Evenwood (2 miles west). Larger places within reach include Durham (12 miles north-east), Newton Aycliffe (5 miles east), Spennymoor (7 miles north-east), Shildon (3 miles east), Crook (6 miles north) and Ferryhill (8 miles north-east).
Near you in Hummerbeck
Around Hummerbeck, we work in homes near The Queens Head Public House, Oakley Cross Primary School and Nursery and Church of St Helen, among other places. The nearest railway station is Bishop Auckland station, about 2.7 miles north-east of the centre. Other landmarks nearby include Bishop Auckland Hospital (2.5 miles north-east) and Auckland Castle (3.3 miles north-east).
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- The colour and finish to match
- The type of damage
- The size and number of damaged areas
- Previous DIY repairs that have to come out
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Most quotes are done from photos alone. To make it quick:
- The material, if you know it
- The postcode, so we can plan the visit
- Something in shot to show the size
- A close-up of the damage, in focus
Most clients in Hummerbeck get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
How the visit works
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a full day for most jobs. We leave the room clean.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
What a repair can’t fix
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
