North Yorkshire · England

Bath re-enamelling & resurfacing in Muston, North Yorkshire

We travel to Muston for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • A roll-top that is seen better days
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Muston

Work for landlords and builders

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Bath re-enamelling in Muston, done in place

After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include worn patches where water runs and sits and stains that won’t shift, in basins & shower trays, pressed steel baths and cast iron baths.

All our work comes with a one-year guarantee, wherever you are in North Yorkshire.

Location
Muston (YO14)
County
North Yorkshire
Cover
A year, on every repair
Quotes
From £350. Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Common problems we fix in Muston

Hard water speeds up the wear, and gritty cleaners are the worst culprits.

Typical reasons for a call-out include:

  • Wear marks under the taps
  • Enamel that’s lost its shine and feels rough
  • Staining under the taps and around the waste
  • An old resurfacing that is failing

Before you book anyone

  • Whether the price is fixed and includes VAT
  • Who turns up on the day
  • What prep work is covered
  • How long it needs to cure

Our hiring checklist

The process

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take a full day.

  1. We mask and protect the room and ventilate it.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We prepare the surface and apply a bonding primer.
  4. We spray several coats of new enamel finish.
  5. Once cured, normally by the next day, the bath is ready.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Keep a parking space free if you can
  • Ensure the room can be ventilated

Getting a price

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Get a free quote

Read more

Prices and what affects them

Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:

  • The material
  • How easy the damage is to reach
  • How many items we do on one visit
  • Unusual colours or finishes

A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

Quotes from your pictures

A couple of clear pictures is all it takes. It helps if you send:

  • Where you are, by postcode
  • A coin beside the damage so we can judge size
  • The material, if you know it
  • A clear, close picture of the problem area

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Why repair rather than replace?

A replacement often means several trades over several days. Resurfacing takes one technician and normally a day. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

Why us?

  • Straight answers about what a repair can do
  • Everything repaired in place
  • CHAS and Constructionline accredited
  • One price list for the whole UK

Read our pricing or guide to resurfacing and replacement costs.

What a repair can’t fix

A repair isn’t always the answer, and we would rather say so up front. Repairs won’t solve:

  • A bath that’s rusted through
  • Acrylic that moves when you stand in it
  • A cast iron or steel bath that is cracked right through

Send us photos and we will tell you honestly.

What we work on

  • Victorian roll-tops
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths

Questions from Muston

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

It’s been repaired before. Can you still fix it?

Generally, yes. The old repair comes out first, so let us know about it.

Does the bath have to be removed?

No. We resurface it in place, so nothing else is disturbed.

Is it safe with children and pets around?

Just keep them out of the work area. We will tell you when the room can be used again.

What information do you need?

Some pictures, your postcode and how to reach you. On the day, access to the room.

Can you price it without visiting?

Generally, yes. Clear pictures let us give you a fixed quote without visiting.

Will there be fumes?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Muston and nearby

Muston is about 6 miles south-east of Scarborough, in North Yorkshire. Clients in Muston get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Muston is one of 626 places in North Yorkshire we cover. Our jobs stretch from Muston to Leeds (about 57 miles away).

We cover every part of YO14 and the streets around it. Jobs here include addresses on King Street, Carr Lane and King Hill. If you’re just outside Muston, we cover Gristhorpe (2 miles north), Lebberston (2 miles north-west), Killerby (3 miles north-west), Cayton (4 miles north-west) and Osgodby (4 miles north-west). We also work in nearby towns such as Scarborough (6 miles north-west), Falsgrave (6 miles north-west), Northstead (7 miles north-west), Newby (8 miles north-west), Scalby (9 miles north-west) and Throxenby (8 miles north-west).

Around Muston

Typical jobs here are in homes near Ebor Academy Filey, The Ship Inn and Church of All Saints, among other places. The nearest railway station is Filey station, roughly 1.1 miles north-east. Nearby you’ll also find Scarborough Fair Collection (2.5 miles north).

Map of Muston © OpenStreetMap contributors

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.