Worcestershire · England
Bath Re-enamelling in Hurcott
Bath re-enamelling in and around Hurcott: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- The type of damage
- What the surface is made of
- Where the damage is and how we get to it
- The size and number of damaged areas
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what helps:
- Natural light rather than flash
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- A wider photo showing the whole bath
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Bath re-enamelling at your home in Hurcott
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Our technicians work on acrylic baths, basins & shower trays and Victorian roll-tops, and common reasons people get in touch are staining under the taps and around the waste and chips and rust in more than one place.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Where
- Hurcott (DY10)
- County
- Worcestershire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
So the finish stays in good condition for years:
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
- Don’t use the bath until it has fully cured
- Never use suction bath mats
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why Hurcott clients choose us
- Dust sheets down, tidy finish
- Colour-matched on site
- Work done at your home or business
- Nothing taken out or refitted
Take a look at our pricing or bath cost comparison.
Where we work around Hurcott
Hurcott is about 1 mile north-east of Kidderminster, in Worcestershire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Our repair technicians cover all 376 towns and villages in Worcestershire. Our jobs stretch from Hurcott to Birmingham (15 miles away).
All of DY10 is within our area. You’ll find streets such as Hurcott Lane and Hurcott Road. We also cover the places around Hurcott: Comberton (1 mile south), Kidderminster (1 mile south-west), Stone (2 miles south), Spennells (2 miles south) and Stanklyn (2 miles south). We also work in nearby towns such as Worcester (14 miles south), Redditch (14 miles south-east), Bromsgrove (8 miles south-east), Droitwich Spa (10 miles south), Stourport-on-Severn (5 miles south-west) and Bewdley (4 miles west).
Landmarks near Hurcott
Locally, our jobs take us to homes close to St Oswald's Church Centre, Holy Trinity School and King Charles I School and the streets around them. The nearest railway station is Kidderminster station, roughly 1.2 miles south-west. Other landmarks nearby include Caldwall Castle (1.6 miles south-west) and Kidderminster Hospital (1.9 miles south-west). Open spaces near Hurcott include Wilden Marsh and Axborough Hill.
How the visit works
You don’t need to empty the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
Before we arrive
- Mention if the room is upstairs or in a flat
- Make sure the room can be ventilated
- Avoid using the area for a few hours before we arrive
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Related advice
What we cannot put right
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
- A bath that’s rusted through
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Common questions in Hurcott
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do you charge for travel?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
What happens after I send pictures?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
It’s been repaired before. Can you still fix it?
Normally, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Can I get a quote without a visit?
Typically, yes. Clear photos let us give you a fixed quote without visiting.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
What else we do in Hurcott
Common problems we fix in Hurcott
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Most people get in touch after spotting something like this:
- A dull, rough surface that won’t come clean
- Wear marks under the taps
- A peeling or bubbling previous coating
- Stains that will not shift
What your quote should include
- Whether the price covers travel
- Whether they match the colour on site
- How soon you can use it again
- Whether the price is fixed and includes VAT
About our accreditations · Every repair comes with a one-year guarantee.
