Greater London · England
Bath re-enamelling & resurfacing in Hyde farm estate, Greater London
Bath re-enamelling across Hyde farm estate and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A roll-top that’s seen better days
- A dull, rough surface that won’t come clean
About our bath re-enamelling in Hyde farm estate
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. If you are dealing with wear marks under the taps and staining under the taps and around the waste, we can generally put it right.
Every repair is covered by our one-year guarantee.
- Where
- Hyde farm estate (SW12, SW2, SW4)
- Area hub
- Greater London
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Landlords, agents and businesses in Hyde farm estate
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
For anyone letting property in or around Hyde farm estate, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
Also near Hyde farm estate
What else we do in Hyde farm estate
Keeping it looking good
Looking after the surface is easy:
- Don’t use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Don’t leave a chip unrepaired
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Our work in Hyde farm estate
Hyde farm estate is about 1 mile north of Streatham, in Greater London. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. We cover 764 places in Greater London, from the larger towns to small villages.
Here we cover the SW12, SW2 and SW4 postcode area. Jobs here include addresses on Weir Road, Byrne Road and Atkins Road. Neighbouring places we cover include Grange Mills (1 mile north-west), Balham (1 mile west), Clapham Park (1 mile north), Streatham Hill (1 mile east) and Streatham Park (1 mile south). We also work in nearby towns such as London (4 miles north-east), City of Westminster (5 miles north), Marylebone (5 miles north), Kensington (5 miles north-west), St Pancras (6 miles north) and Shoreditch (6 miles north-east).
Near you in Hyde farm estate
Typical jobs here are in homes near La Retraite Roman Catholic Girls' School, St. Stephen's Church and Telferscot Primary School. Nearby too are Wandsworth Common (1.4 miles west), The Bedford pub (0.5 miles west) and Waldorf School of South West London (under half a mile south). The nearest railway station is Balham station, about 0.5 miles west of the centre. A little further out are Southside Wandsworth (2.5 miles west) and Streatham Hill (0.7 miles east). Open spaces near Hyde farm estate include Knight's Hill and Oakleigh Way.
Your questions about bath re-enamelling in Hyde farm estate
Is repairing better than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
How long will the bath be out of use?
Most baths are done in a day, ready the following day. We give you timings with the quote.
How we price bath re-enamelling
Prices start from £350. You will know the full cost before booking. We look at:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- Unusual colours or finishes
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before you book.
Send pictures for a quote
It only takes a minute to photograph the damage. Please include:
- The material, if you know it
- Any earlier repairs or coatings
- One picture of the entire bath
- Daylight if possible, and no flash reflection
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow the best part of a day. Before we go, we will explain when it can be used and how to care for it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Let us know if it has been repaired before
- Make sure the room can be ventilated
- Tell us about parking, stairs or access
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Advice
When a repair isn’t the answer
A repair is not always the answer, and we’d rather say so up front. We can’t fix:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Common problems we fix in Hyde farm estate
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is typically as strong as ever.
Get in touch if you’ve noticed:
- An outdated colour you’d like to change
- A coating lifting around the plughole
- Staining under the taps and around the waste
- Enamel that’s lost its shine and feels rough
Comparing quotes
- Who turns up on the day
- How changes to the job are handled
- What aftercare is recommended
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
