Hampshire · England
Bath re-enamelling & resurfacing in Hyde, Hampshire
Our repair technicians come to Hyde for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A coating lifting around the plughole
- A roll-top that’s seen better days
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. Most visits take most of the day, including clearing up.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Advice
Bath re-enamelling in Hyde, done in place
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair cast iron baths, pressed steel baths and acrylic baths, and common reasons people get in touch are thin, worn enamel in places and a coloured bath you want in white.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Hyde (SO23, SO22, SO20)
- Region
- Hampshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Hyde
More services for Hyde
Common questions in Hyde
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How long is the bath unusable?
Typically one day, with the bath ready the next day. A badly pitted bath can need a second day.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Do not let dyes or oils sit on the finish
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Hyde and nearby
Hyde is about 1 mile north of Winchester, in Hampshire. Whether you’re in the middle of Hyde or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our repair technicians cover 683 places across Hampshire, from the larger towns to small villages. You can also see our page for London, about 60 miles away.
We cover every part of SO23, SO22 and SO20. From Elm Road, Swan Lane and City Road or a nearby road, we can come to you. Neighbouring places we cover include Abbotts Barton (1 mile north-east), Winchester (1 mile south), Weeke (1 mile west), Highcliffe (1 mile south-east) and Bar End (1 mile south). Larger places within reach include Eastleigh (7 miles south), Andover (12 miles north-west), Totton (13 miles south-west), Chandler's Ford (7 miles south-west), Hedge End (11 miles south) and Romsey (9 miles south-west).
Landmarks near Hyde
Typical jobs here are in homes near St Bede Church of England Primary School, Peter Symonds College and Leigh House Hospital. Nearby too are St Bartholomew's Church (under half a mile south-west), The King Alfred pub (under half a mile south-east) and St. Cross Park (1.7 miles south). Hyde has its own railway station: Winchester station. Well-known places in the area include Winchester Castle (0.6 miles south-west) and Royal Observer Corps Museum (0.5 miles north). The countryside around Hyde includes Winnall Moors and Twyford Down.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Previous DIY repairs that have to come out
- What kind of damage it is
- The size and number of damaged areas
- Where the damage is and how we get to it
A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what helps:
- A close-up of the damage, in focus
- The material, if you know it
- A wider photo showing the whole bath
- The postcode, so we can plan the visit
For a price in Hyde, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
When to call us in Hyde
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
You may need us if you’ve spotted:
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Several chips and rust patches
- A coating lifting around the plughole
Comparing quotes
- Who turns up on the day
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the photos show
When we’d advise against a repair
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Landlords, agents and businesses in Hyde
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
