Hampshire · England
Bath re-enamelling & resurfacing in Weeke, Hampshire
Full bath re-enamelling and resurfacing for homes and businesses in Weeke and across Hampshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An old resurfacing that’s failing
- A roll-top that is seen better days
How we price bath re-enamelling
Prices start from £350. There’s no charge for travel to Weeke. The price comes down to:
- Where the damage is and how we get to it
- Unusual colours or finishes
- How much damage there is
- What kind of damage it is
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Getting a price from pictures
We price nearly every job from pictures. This is what we need:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- Details of any past repairs
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
About our bath re-enamelling in Weeke
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It usually takes one visit, with the bath ready to use the following day. We work on pressed steel baths, cast iron baths and Victorian roll-tops, and common reasons people contact us are a bath in a colour that no longer suits and worn patches where water runs and sits.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- Weeke (SO22, SO23)
- County
- Hampshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Weeke
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Will there be a smell?
Expect a mild smell while we’re working that clears as it cures.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How do I get a price for bath re-enamelling in Weeke?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
How to care for the repair
Nothing complicated is needed:
- Keep toiletries on a shelf rather than in the bath
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs straight away
- Do not leave a chip unrepaired
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- CHAS and Constructionline accredited
- Same prices wherever you are
- We’ll tell you if it’s not worth repairing
- Colour-matched on site
See our prices page or guide to resurfacing and replacement costs.
Places near Weeke
What else we do in Weeke
What we are called out for in Weeke
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is generally as strong as ever.
These are the problems we’re asked about most:
- Wear marks under the taps
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
- Several chips and rust patches
What to look for in a quote
- How long it needs to cure
- A fixed price, and whether VAT is included
- Whether the price covers travel
- Whether cleaning and preparation are in the price
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How the visit works
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
Get a quote
Upload pictures of the damage and a wider shot of the whole item, and tell us you are in Weeke, and we’ll come back with a fixed quote.
Related advice
When we’d advise against a repair
In fairness, there are a few things a repair won’t fix:
- Problems we can’t see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Where we work around Weeke
Weeke is about 1 mile north-west of Winchester, in Hampshire. From the centre of Weeke to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 683 towns and villages in Hampshire. Our nearest city page is London, about 61 miles away.
Jobs in SO22 and SO23 work the same way as everywhere else we cover. Whether you live on Elm Road, Dean Lane and Links Road or a nearby road, we can come to you. If you’re just outside Weeke, we cover Harestock (1 mile north), Hyde (1 mile east), Abbotts Barton (1 mile east), Winchester (1 mile south-east) and Littleton (1 mile north-west). Larger places within reach include Eastleigh (7 miles south), Andover (12 miles north-west), Totton (13 miles south-west), Chandler's Ford (6 miles south), Hedge End (11 miles south) and Romsey (8 miles south-west).
What’s near Weeke
Our clients here include homes close to Weeke Primary School, Church of St Matthew and The Railway Inn and the streets around them. Also close by are St. Cross Park (1.8 miles south) and Peter Symonds College (0.6 miles east). The closest station to Weeke is Winchester station, about 0.6 miles south-east of the centre. Nearby you will also find Winchester Castle (0.9 miles south-east) and Royal Green Jackets (Rifles) Museum (0.8 miles south-east). The countryside around Weeke includes Twyford Down and Winnall Moors.
About our accreditations · Every repair comes with a one-year guarantee.
