Hampshire · England
Bath Re-enamelling in Harestock
Local bath re-enamelling for Harestock: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
Bath re-enamelling in Harestock without replacing anything
The bath stays where it is, so the taps, tiles and plumbing are not touched. It usually takes one visit, and can be used again the following day. We’re frequently asked to fix brown or grey marks that don’t clean off and worn patches where water runs and sits, across Victorian roll-tops, acrylic baths and pressed steel baths.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Harestock (SO22)
- Region
- Hampshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Harestock
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
Which areas do you work in?
We work UK-wide. Our prices are the same everywhere.
What affects the price in Harestock
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- Whether we combine several jobs
- Any earlier repairs that need removing first
- The material and finish
- How easy the damage is to reach
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Phone pictures are fine, there’s no need for anything special. Make sure they show:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- A photo taken from further back
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
When a repair is not the answer
A repair is not right for every job, including:
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Also near Harestock
Also in Harestock
Covering Harestock
Harestock is about 2 miles north-west of Winchester, in Hampshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Harestock is one of 683 towns and villages in Hampshire where we work. Our nearest city page is London, about 61 miles away.
Here we cover the SO22 postcode area. From Kennel Lane, Burley Road and Stoney Lane or a nearby road, we can come to you. Other places close to Harestock include Littleton (1 mile north-west), Weeke (1 mile south), Abbotts Barton (1 mile south-east), Hyde (1 mile south-east) and Headbourne Worthy (1 mile north-east). We also work in nearby towns such as Eastleigh (8 miles south), Andover (11 miles north-west), Totton (14 miles south-west), Chandler's Ford (7 miles south), Hedge End (12 miles south) and Romsey (9 miles south-west).
Around Harestock
Around Harestock, we work in homes near Harestock Primary School, Saint Barnabas and Henry Beaufort School, among other places. The nearest railway station is Winchester station, about 1.2 miles south-east of the centre. Nearby you will also find Royal Observer Corps Museum (1.1 miles south-east) and Royal Hampshire County Hospital (1.5 miles south). The countryside around Harestock includes Twyford Down and Winnall Moors.
What we’re called out for in Harestock
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- Stains that won’t shift
- Several chips and rust patches
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
Questions to ask before booking
- Whether the price covers travel
- The length of the guarantee and what it covers
- What protection goes down before work starts
- What preparation is included
Repair or replace in Harestock?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Same prices wherever you are
- Straight answers about what a repair can do
- One-year guarantee on every repair
- Work done at your home or business
See our full price list and guide to resurfacing and replacement costs.
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take the best part of a day.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
- Open a window if you can
Get a quote
Email us photos of the damage and one of the whole item, with your SO22 postcode, and we will reply with a fixed price.
Related advice
Landlord and trade work in Harestock
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How to look after the repair
Most damage we see is avoidable. A few tips:
- Dry the bath after use to stop limescale
- Don’t let dyes or oils sit on the finish
- Have chips seen to early
- Do not leave bottles, razors or sponges standing on the surface
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
