North Somerset · England
Bath Re-enamelling in Icelton
Full bath re-enamelling and resurfacing for homes and businesses in Icelton and across North Somerset. Send photos for a free, fixed quote.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
Bath re-enamelling in Icelton, done in place
The bath stays where it is, so the taps, tiles and plumbing are not touched. It normally takes one visit, with the bath ready to use the following day. We regularly repair pressed steel baths, cast iron baths and Victorian roll-tops, and the jobs we see most are a period or roll-top bath worth keeping and brown or grey marks that don’t clean off.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Area
- Icelton (BS22)
- Area hub
- North Somerset
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
More services for Icelton
Prices and what affects them
Prices start from £350. Prices are worked out job by job. The main factors are:
- What the surface is made of
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
Send photos for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- A picture taken from further back
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why book with us
- One price list for the entire UK
- Everything repaired in place
- Colours mixed by hand to suit your surface
- One-year guarantee on every repair
See our full price list or bath cost comparison.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
FAQs for Icelton
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
How long does re-enamelling take?
One day for most baths, ready the next day. We will confirm timings when we quote.
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It typically takes the best part of a day, and you can get on with other things while we are there.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Keep children and pets away from the room on the day
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
When to call us in Icelton
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.
These are the problems we’re asked about most:
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- Wear marks under the taps
Questions to ask before booking
- How long it needs to cure
- How your room will be protected
- How long the guarantee is and what it covers
- Whether the price is fixed and includes VAT
About Icelton
Icelton is about 3 miles north-east of Weston-super-Mare, in North Somerset. From the centre of Icelton to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Our technicians cover all 86 towns and villages in North Somerset, from the larger towns to small villages.
All of BS22 is covered, from the main roads to the quietest streets. If you’re just outside Icelton, we cover Wick St Lawrence (1 mile west), St Georges (1 mile south), Norton (2 miles south-west), West Wick (2 miles south) and Worle (2 miles south-west). Within a short drive, we also cover Weston-super-Mare (3 miles south-west), Portishead (9 miles north-east), Clevedon (4 miles north-east), Nailsea (7 miles north-east), Milton (3 miles south-west) and Yatton (3 miles east).
Local landmarks in Icelton
Typical jobs here are in homes near Castle Batch Primary School Academy, Priory Community School and Church of St Lawrence. The closest station to Icelton is Worle station, about 1.9 miles south. Other landmarks nearby include Castle Batch (1.4 miles south-west) and North Somerset Community Hospital (4.3 miles north-east). Green spaces nearby include Worlebury Hill and Blake's Pools.
When we would advise against a repair
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Icelton
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
