Aberdeenshire · Scotland
Bath Re-enamelling in Inchmarlo
Fixed-price bath re-enamelling in Inchmarlo and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- An outdated colour you’d like to change
- Enamel that is lost its shine and feels rough
Looking after it afterwards
Once the work has cured, treat it gently:
- Clean with a soft cloth and mild detergent
- Don’t leave a chip unrepaired
- Keep suction mats out of the bath
- Keep toiletries on a shelf rather than in the bath
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Bath re-enamelling in Inchmarlo without replacing anything
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Our repair technicians work on cast iron baths, pressed steel baths and basins & shower trays, and the jobs we see most are brown or grey marks that don’t clean off and wear marks under the taps.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Inchmarlo (AB31)
- County
- Aberdeenshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why choose Surface Doctor in Inchmarlo
- No need to remove anything
- One visit for most repairs
- One price list for the entire UK
- Work done at your home or business
Read our full price list and bath cost comparison.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Inchmarlo, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.
Other services in Inchmarlo
Inchmarlo and the surrounding area
Inchmarlo is about 16 miles south of Inverurie, in Aberdeenshire. We visit clients in Inchmarlo, so there is no workshop to go to. We work in 161 places in Aberdeenshire, from the larger towns to small villages.
Every address in AB31 is covered. Whether you live on Target Wood Drive, North Mains and Queens Court or a nearby road, a technician can come to you. Nearby, we also work in Banchory (2 miles east), Strachan (3 miles south), Torphins (4 miles north-west), Potarch (4 miles west) and Crathes (5 miles east). Further out, we also cover Westhill (11 miles north-east), Stonehaven (14 miles south-east), Kemnay (12 miles north), Kintore (14 miles north-east), Aboyne (10 miles west) and Alford (13 miles north-west).
Around Inchmarlo
In Inchmarlo, that means homes near Banchory Academy. Further afield, we also cover the area around Banchory Museum (1.6 miles south-east) and Castlehill of Strachan (3.4 miles south). For a walk, there is Black Loch and Scolty Hill.
Prices and what affects them
Resurfacing from £350. We price every job individually, from your photos. What matters most is:
- The size and number of damaged areas
- The material and finish
- The colour and finish to match
- Doing more than one item at once
Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your photos
We price nearly every job from pictures. This is what to send:
- The material, if you know it
- Your postcode, so we can check dates
- One sharp close-up of the damage
- One picture of the entire bath
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Common questions in Inchmarlo
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Inchmarlo.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and we will quote them together.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Common problems we fix in Inchmarlo
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, normally first under the taps and around the waste.
Common reasons people in Inchmarlo contact us are:
- A bath in a colour that no longer suits
- Enamel that’s lost its shine and feels rough
- Several chips and rust patches
- A peeling or bubbling previous coating
Questions to ask before booking
- Whether the colour is mixed to match
- If travel is included in the price
- Whether cleaning and preparation are in the price
- When it can be used again
The process
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes the best part of a day for most jobs. The room is left tidy and you will know when it can be used.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the next day.
Getting ready for the visit
- Ensure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
How to get a price
The quickest way to a price is to send a couple of photos through our quote form or ring us. We will say immediately if a repair is the right fix.
Related advice
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
About our accreditations · Every repair comes with a one-year guarantee.
