Lancashire · England
Bath Re-enamelling in Inglewhite
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Inglewhite. Free, fixed quotes from your photos.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
How we handle bath re-enamelling in Inglewhite
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on pressed steel baths, Victorian roll-tops and acrylic baths, and common reasons people contact us are an old resurfacing that’s failing and a period or roll-top bath worth keeping.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Inglewhite (PR3)
- County
- Lancashire
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
About Inglewhite
Inglewhite is about 4 miles north-west of Longridge, in Lancashire. Our repair technicians come to homes and businesses in Inglewhite and the surrounding area, so there’s no workshop to go to. We work in all 482 towns and villages in Lancashire. Our jobs stretch from Inglewhite to Manchester (33 miles away).
Every address in PR3 is within our area. Jobs here include addresses on Button Street and Silk Mill Lane. We also cover the places around Inglewhite: Whitechapel (1 mile north-east), Goosnargh (2 miles south), Cumeragh Village (3 miles south-east), Pudding Pie Nook (3 miles south) and Whittingham (3 miles south-east). We also work in nearby towns such as Preston (6 miles south), Lancaster (14 miles north), Chorley (14 miles south), Lytham St Anne's (15 miles south-west), Bamber Bridge (9 miles south) and Accrington (15 miles south-east).
Near you in Inglewhite
Typical jobs here are in homes near The Green Man at Inglewhite pub, Inglewhite Congregational Church and Goosnargh Whitechapel Primary School, among other places. Further afield, we also cover the area around Greenhalgh Castle (4.2 miles north-west) and Royal Preston Hospital (4.5 miles south). For a walk, there is Beacon Fell and Grimsargh Wetlands.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The process
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes the best part of a day, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
Get a quote
Most clients in Inglewhite get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Honest limits
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- A metal bath with a through crack
Send us photos and we will tell you honestly before you book.
Materials we work on in Inglewhite
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Also near Inglewhite
Other services in Inglewhite
Signs you need bath re-enamelling in Inglewhite
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
It’s worth getting a quote if you see:
- Several chips and rust patches
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
- A bath in a colour that no longer suits
What to look for in a quote
- How to care for the finish
- A fixed quote, and whether VAT is included
- Whether the colour is mixed to match
- What prep work is covered
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your photos. The main factors are:
- The material
- How easy the damage is to reach
- The colour and finish to match
- How many items we do on one visit
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Getting a price from pictures
We price nearly every job from photos. This is what to send:
- What it’s made of, if you know
- One sharp close-up of the damage
- Something in shot to show the size
- Where you are, by postcode
Send us photos of the damage and a wider shot of the entire item, with your PR3 postcode, and we will reply with a fixed quote.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Landlords, agents and businesses in Inglewhite
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Inglewhite, we’ll quote for several properties at once. Send pictures for each one and we’ll price them together.
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- Respect the curing time we give you
- Have chips seen to early
- Stick to gentle, non-abrasive cleaners
- Never use suction bath mats
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Inglewhite questions
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
What areas do you cover?
The whole UK, including all of Lancashire. Send your postcode with your photos and we’ll offer you dates.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
How long does re-enamelling take?
One day for most baths and can be used the day after. We will confirm timings when we quote.
What happens after I send photos?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
About our accreditations · Every repair comes with a one-year guarantee.
