Hampshire · England

Bath Re-enamelling in Inhurst

Problem with your bath in Inhurst? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Inhurst?

Bath re-enamelling in Inhurst, done in place

The bath stays where it is, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. Whether it’s a period or roll-top bath worth keeping and worn patches where water runs and sits, we can help.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Where
Inhurst (RG26)
Region
Hampshire
Cover
12 months on all our work
Quotes
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Aftercare tips

How the surface is treated afterwards matters:

  • Don’t use the bath until it has fully cured
  • Get any chip repaired quickly
  • Use washing-up liquid and a soft cloth
  • Keep toiletries on a shelf rather than in the bath

Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.

What we can’t put right

It helps to know what we cannot do too:

  • A bath that is rusted through
  • A bath split right through the body
  • Leaks from fittings rather than the bath

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Inhurst

  • Basins & shower trays
  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths

How the visit works

The work is clean and fairly quiet. We protect the area first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.

  1. We mask and protect the room and ventilate it.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the following day, the bath is ready.

How to prepare

  • Keep pets and children out of the room while we work
  • Open a window if you can
  • Clear the area around the damage

Getting a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Send pictures for a quote

Advice

Your questions about bath re-enamelling in Inhurst

Do you resurface freestanding baths?

Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.

Will the bath be moved?

No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.

How long is the bath unusable?

One day for most baths, ready the next day. We give you timings with the quote.

What happens next?

You will get a fixed quote back. You’re under no obligation.

Can you repair several things at once?

Of course, and it normally saves money. Send pictures of everything together and we will quote them together.

Is my repair covered?

Every repair comes with our one-year guarantee. We will explain what it covers when we quote.

What information do you need?

Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.

How do I get a price for bath re-enamelling in Inhurst?

Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.

Repairs by material

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

What we’re called out for in Inhurst

Hard water speeds up the wear, and gritty cleaners are the worst culprits.

The most common problems we are called about are:

  • Thin, worn enamel in places
  • An original cast iron bath that needs restoring
  • A bath in a colour that no longer suits
  • Brown or grey marks that don’t clean off

Questions to ask before you book

  • How your room will be protected
  • Whether there are any call-out or travel charges
  • How long it needs to cure
  • Who turns up on the day

How to compare quotes

Can I fix it myself?

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

Landlords, agents and businesses in Inhurst

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Covering Inhurst

Inhurst is about 2 miles west of Tadley, in Hampshire. Customers in Inhurst get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We cover 683 places in Hampshire, from the larger towns to small villages. Our jobs stretch from Inhurst to London (about 48 miles away).

All of RG26 is within our area, from the main roads to the quietest streets. That includes homes on Inhurst Lane, Stokes Lane and Brimpton Road and the roads around them. Nearby, we also work in Heath End (1 mile north-east), Baughurst (1 mile south-east), Axmansford (1 mile south), Brimpton Common (1 mile north-west) and Tadley (2 miles east). Further out, we also cover Basingstoke (7 miles south-east), Yateley (15 miles east), Hook (11 miles south-east), Popley (6 miles south-east), Kempshott (8 miles south) and Oakridge (7 miles south-east).

Near you in Inhurst

We visit homes around The Hurst School, Burnham Copse Primary School and Saint Mary's Church, among other places. The closest station to Inhurst is Midgham station, about 2.8 miles north of the centre. Nearby you’ll also find Park Prewett Hospital (5.8 miles south-east) and Calleva Museum (3.5 miles east). For a walk, there is Thatcham Reed Beds.

Map of Inhurst © OpenStreetMap contributors

Repair or replace: which is better?

A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

What you get with us

  • One-year guarantee on every repair
  • Straight answers about what a repair can do
  • A fixed quote before booking
  • Repair technicians who travel to you, UK-wide

Read our pricing and resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.