Hampshire · England
Bath Re-enamelling in Wolverton Common
We travel to Wolverton Common for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
About our bath re-enamelling in Wolverton Common
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for a coloured bath you want in white and enamel that’s lost its shine and feels rough, in basins & shower trays, acrylic baths and pressed steel baths.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Wolverton Common (RG26)
- Area hub
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Wolverton Common
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Get in touch if you’ve noticed:
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
Comparing quotes
- Whether a trained technician does the job
- How soon you can use it again
- How the colour is matched
- What the guarantee covers, and for how long
When we’d advise against a repair
In fairness, there are a few things a repair won’t fix:
- Holes rusted through the metal
- A metal bath with a through crack
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Questions from Wolverton Common
Do you cover the entire of Hampshire?
Everywhere in the UK, Wolverton Common included. There’s no extra charge for travel.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
Do you cover Wolverton Common?
We do. Repair technicians travel to Wolverton Common from across the region, and the price is the same as everywhere else.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Can a failed resurfacing be redone?
Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is repairing better than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Wolverton Common and nearby
Wolverton Common is about 3 miles south-west of Tadley, in Hampshire. Wherever you are in the RG26 postcode area, we come to you. We cover all 683 towns and villages across Hampshire. Our jobs stretch from Wolverton Common to London (about 49 miles away).
Jobs in RG26 work the same way as everywhere else we cover. Whether you live on Wolverton Road and Holt Lane or anywhere nearby, we can come to you. We also cover the places around Wolverton Common: Townsend (1 mile south), Axmansford (1 mile north-east), Inhurst (2 miles north-east), Baughurst (2 miles north-east) and Heath End (2 miles north-east). Within a short drive, we also cover Basingstoke (6 miles south-east), Andover (15 miles south-west), Tadley (3 miles north-east), Hook (11 miles east), Popley (6 miles south-east) and Kempshott (7 miles south).
What’s near Wolverton Common
We visit homes around The Hurst School, Church of St Catherine and The George And Dragon Public House, among other places. Wolverton Common’s nearest station is Midgham station, roughly 4.4 miles north. Nearby you will also find Park Prewett Hospital (5 miles south-east).
Towns and villages near Wolverton Common
Also in Wolverton Common
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Rinse off hair dye, oils and bath bombs immediately
- Repair dripping taps early
- Have chips seen to early
- Leave the bath for the full curing time before using it
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Prices and what affects them
Prices start from £350. You will know the full cost before booking. We take into account:
- What kind of damage it is
- The material
- Whether we combine several jobs
- The colour and finish to match
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Before you send pictures, these tips help us give you a firm price:
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- The material, if you know it
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
Why repair rather than replace?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- Colour-matched on site
- One price list for the entire UK
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
See our full price list or bath cost comparison.
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. The job generally runs to most of the day, including clearing up.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
- Open a window if you can
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
