Cornwall · England
Bath re-enamelling & resurfacing in Insworke, Cornwall
We travel to Insworke for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Insworke customers choose us
- Colours mixed by hand to suit your surface
- Same prices wherever you are
- Every repair guaranteed for a year
- Most jobs done in one visit
Take a look at our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling in Insworke without replacing anything
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Whether it’s a roll-top that’s seen better days and several chips and rust patches, we can help, whatever the material.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Insworke (PL10)
- Area hub
- Cornwall
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Access to the area
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How many areas need work
We charge the same wherever you are, with no extra for Insworke. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
The better the photos, the more accurate the price. Here’s what helps:
- Any earlier repairs or coatings
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- Where you are, by postcode
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
How it works
Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. It normally takes most of the day, and we will tell you if anything changes.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
Getting a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Related advice
Questions from Insworke
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Do you cover Insworke?
We do. Technicians travel to Insworke from across the region, and the price is the same as everywhere else.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Also in Insworke
Do you need bath re-enamelling in Insworke?
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Look out for these signs:
- An old resurfacing that is failing
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
- Thin, worn enamel in places
What to look for in a quote
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- What the guarantee covers, and for how long
- How to care for the finish
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Insworke and nearby
Insworke is about 3 miles south-west of Stonehouse, in Cornwall. Whether you are in the middle of Insworke or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 644 towns and villages in Cornwall, from the larger towns to small villages.
Postcode districts we cover here: PL10. Whether you live on Mill Road, Millpool Road and St John's Road or anywhere nearby, we can come to you. If you’re just outside Insworke, we cover Southdown (1 mile east), Millbrook (1 mile south), St John (1 mile north-west), Kingsand (1 mile south) and Cawsand (2 miles south). Further out, we also cover Stonehouse (3 miles north-east), Saltash (4 miles north), Liskeard (13 miles north-west), Addington (13 miles north-west), Looe (11 miles west) and Burraton Coombe (4 miles north).
Around Insworke
Around Insworke, we work in homes near Church of All Saints, Torpoint Community College and Millbrook CofE Primary School, among other places. Insworke’s nearest station is Devonport station, roughly 2.6 miles north-east. A little further out are Trematon Castle (3.5 miles north) and Elizabethan House Museum (3.5 miles east). Green spaces nearby include Penlee Battery.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Honest limits
Some jobs are not right for a repair, for example:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Landlords, agents and businesses in Insworke
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
