Cornwall · England
Bath Re-enamelling in Kingsand
Full bath re-enamelling and resurfacing for homes and businesses in Kingsand and across Cornwall. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An old resurfacing that is failing
- Chips and rust in more than one place
How we handle bath re-enamelling in Kingsand
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We’re frequently asked to fix a coating lifting around the plughole and chips and rust in more than one place, in basins & shower trays, pressed steel baths and Victorian roll-tops.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Kingsand (PL10)
- Region
- Cornwall
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. There’s no area surcharge for Kingsand. What changes the price is:
- The type of damage
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- Doing more than one item at once
We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
A couple of clear pictures is all it takes. It helps if you send:
- A photo taken from further back
- A coin beside the damage so we can judge size
- Where you are, by postcode
- A close-up of the damage, in focus
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs straight away
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Repair or replace in Kingsand?
A replacement frequently means several trades over several days. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Prices start from £350. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
What you get with us
- One visit for most repairs
- No extra charge for your area
- Everything repaired in place
- CHAS and Constructionline accredited
Read our prices page and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Common questions in Kingsand
What happens next?
You will get a fixed quote back, plus dates. There’s no obligation to book.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your PL10 postcode.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can I get a quote without a visit?
Usually, yes. Clear photos let us give you a fixed quote without visiting.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
More services for Kingsand
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a full day. If we find something your photos didn’t show, we will explain it before carrying on.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Let us know about parking or access
Ask for a price
Most customers in Kingsand get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Kingsand and the surrounding area
Kingsand is about 5 miles south-west of Plymouth, in Cornwall. We visit homes and businesses in Kingsand, so you don’t need to take anything anywhere. Our technicians cover 644 places across Cornwall.
Jobs in PL10 work the same way as everywhere else we cover. Jobs here include addresses on Market Street, Lower Row and Green Lane. We also travel to Cawsand (1 mile south), Rame (1 mile south-west), Millbrook (1 mile north-west), Southdown (1 mile north) and Insworke (1 mile north). Within a short drive, we also cover Stonehouse (3 miles north-east), Saltash (5 miles north), Liskeard (14 miles north-west), Addington (14 miles north-west), Looe (11 miles west) and Torpoint (3 miles north).
What’s near Kingsand
Our clients here include homes close to The Rising Sun pub, St Paul's Church and Fourlanesend Community Primary School and the streets around them. For rail, the closest station is Devonport station, roughly 3.3 miles north-east. A little further out are Armada Centre (3.7 miles north-east) and Plymouth General Hospital (2.9 miles north). Green spaces nearby include Penlee Battery.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
