Aberdeenshire · Scotland
Bath Re-enamelling in Inverugie
Problem with your bath in Inverugie? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A roll-top that is seen better days
How we price bath re-enamelling
Prices start from £350. You will know the full cost before you book. We look at:
- The colour and finish to match
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- Access to the area
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send photos for a quote
Most quotes are done from photos alone. To help us price it:
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Bath re-enamelling at your home in Inverugie
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s a bath that stays dull however much you clean it and chips and rust in more than one place, we can normally put it right, on acrylic baths, cast iron baths and Victorian roll-tops alike.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Inverugie (AB42)
- Area hub
- Aberdeenshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Inverugie
More services for Inverugie
Looking after it afterwards
It’s all simple stuff:
- Wash away dyes and oils after use
- Don’t leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
- Fix dripping taps quickly
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Inverugie customers choose us
- Colour-matched on site
- One price list for the entire UK
- Rooms protected and left tidy
- One visit for most repairs
See our prices page and guide to resurfacing and replacement costs.
FAQs for Inverugie
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
How do I get a price for bath re-enamelling in Inverugie?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
What happens after I send photos?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Are there extra charges for Inverugie?
No. Our quotes include travel, and we charge the same wherever you are.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Inverugie.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
The process
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Tell us about parking, stairs or access
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
How to get a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
Inverugie and the surrounding area
Inverugie is about 1 mile north-west of Peterhead, in Aberdeenshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. We work in 161 places in Aberdeenshire, from the larger towns to small villages.
We work across AB42 and the streets around it. If you are just outside Inverugie, we cover Downiehills (1 mile west), Buchanhaven (1 mile east), Kirktown (3 miles north), St Fergus (3 miles north) and Rora (3 miles north-west). Within a short drive, we also cover Fraserburgh (14 miles north-west), Ellon (13 miles south-west), Mintlaw (6 miles west), Broadsea (14 miles north-west), Boddam (4 miles south-east) and Cruden Bay (7 miles south).
Around Inverugie
Other landmarks nearby include Ugie Hospital (1.6 miles east) and HM Prison Peterhead (2.5 miles south-east). For a walk, there is Meet Hill.
For landlords and businesses
We are used to working with agents and managing companies. Send the address, photos and access details.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
When we’d advise against a repair
A repair isn’t always the answer, and we will tell you before we start. Repairs won’t solve:
- A metal bath with a through crack
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Inverugie
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
