Aberdeenshire · Scotland
Bath re-enamelling & resurfacing in Rora, Aberdeenshire
Damaged bath in Rora? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- An old resurfacing that’s failing
What a repair cannot fix
Before you book, it’s worth knowing the limits:
- A cast iron or steel bath that is cracked right through
- A bath that is rusted through
- Leaks from fittings rather than the bath
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
About our bath re-enamelling in Rora
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. We work on Victorian roll-tops, acrylic baths and cast iron baths, and common reasons people contact us are a bath in a colour that no longer suits and staining under the taps and around the waste.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Rora (AB42)
- Area hub
- Aberdeenshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. You can expect it to take most of the day, and we will tell you if anything changes.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Work for landlords and builders
Landlords, letting agents and housing providers in Rora use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
About Rora
Rora is about 5 miles north-west of Peterhead, in Aberdeenshire. Across the AB42 area, we come to you. Rora is one of 161 places in Aberdeenshire where we work.
Here we cover the AB42 postcode area. Streets in the area include The Street and The Spittal, all of which we cover. Close by, we cover Kirktown (2 miles north-east), St Fergus (2 miles north-east), Downiehills (3 miles south-east), Inverugie (3 miles south-east) and Keyhead (3 miles north). We also work in nearby towns such as Peterhead (5 miles south-east), Fraserburgh (11 miles north-west), Ellon (14 miles south-west), Roanheads (5 miles south-east), Clerkhill (5 miles south-east) and Port Henry (5 miles south-east).
Near you in Rora
Other landmarks nearby include Inverugie Castle (2.9 miles south-east) and Ugie Hospital (4.4 miles south-east).
What bath re-enamelling costs
Prices start from £350. We price every job individually. What matters most is:
- The size and number of damaged areas
- Doing more than one item at once
- Previous DIY repairs that have to come out
- The type of damage
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Any details about the material
- Details of any past repairs
- A clear, close picture of the problem area
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What we are called out for in Rora
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
If you can see any of these, send us a photo:
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- Stains that will not shift
What your quote should include
- How long the guarantee is and what it covers
- How to care for the finish
- How the colour is matched
- How the room is protected while they work
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Rora questions
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Aberdeenshire.
What happens once I’ve sent photos?
We come back with a fixed quote. You are under no obligation.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Should you replace it?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why book with us
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
- A year’s guarantee on all work
- We come to you, anywhere in the UK
Read our prices page and bath cost comparison.
Towns and villages near Rora
More services for Rora
About our accreditations · Every repair comes with a one-year guarantee.
