Aberdeenshire · Scotland
Bath re-enamelling & resurfacing in St Fergus, Aberdeenshire
Bath re-enamelling for St Fergus, without a refit. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Stains that will not shift
Honest limits
We will not take on work that will not last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Bath re-enamelling in St Fergus, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We are frequently asked to fix a period or roll-top bath worth keeping and a peeling or bubbling previous coating, on basins & shower trays, Victorian roll-tops and pressed steel baths.
Every repair comes with our one-year guarantee.
- Area
- St Fergus (AB42)
- Region
- Aberdeenshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in St Fergus
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Common reasons people in St Fergus contact us are:
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Several chips and rust patches
- A bath that stays dull however much you clean it
Questions to ask before you book
- Whether the price covers travel
- What preparation is included
- Who turns up on the day
- The length of the guarantee and what it covers
How it works
We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. You can expect it to take a full day, and we will tell you if anything changes.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
What bath re-enamelling costs
Prices start from £350. There is no charge for travel to St Fergus. The price depends on:
- The colour and finish to match
- How many items we do on one visit
- What the surface is made of
- The size and number of damaged areas
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Getting a price from photos
Good photos mean an accurate price. Here’s what helps:
- The postcode, so we can plan the visit
- One picture of the entire bath
- What it’s made of, if you know
- Any earlier repairs or coatings
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Where we work around St Fergus
St Fergus is about 4 miles north-west of Peterhead, in Aberdeenshire. Wherever you are in the AB42 postcode area, we come to you. We work in 161 places across Aberdeenshire.
Here we cover the AB42 postcode area. Whether you live on Alwyn Wynd, Newton Road and Newton Grove or anywhere nearby, a technician can come to you. We also travel to Kirktown (1 mile west), Rora (2 miles south-west), Keyhead (3 miles north-west), Inverugie (3 miles south) and Downiehills (3 miles south). Larger places within reach include Peterhead (4 miles south-east), Fraserburgh (11 miles north-west), Roanheads (4 miles south-east), Clerkhill (4 miles south), Port Henry (4 miles south-east) and Mintlaw (6 miles west).
Near you in St Fergus
In St Fergus, that means homes near St Fergus Parish Church and Churchyard, among other places. Further afield, we also cover the area around Inverugie Castle (2.4 miles south) and Ugie Hospital (3.5 miles south-east). The countryside around St Fergus includes Loch of Strathbeg and Meet Hill.
Questions from St Fergus
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Places near St Fergus
What else we do in St Fergus
Landlord and trade work in St Fergus
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
For anyone letting property in or around St Fergus, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Repair or replace in St Fergus?
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, with the bath ready the next day. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- We will tell you if it’s not worth repairing
- Same prices wherever you are
Take a look at our prices page or bath cost comparison.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Repair dripping taps early
- Don’t leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
