Devon · England

Bath Re-enamelling in Jacobstowe

Full bath re-enamelling and resurfacing for homes and businesses in Jacobstowe and across Devon. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • A roll-top that is seen better days
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Jacobstowe?

Prices and what affects them

Prices start from £350. Every quote is fixed and free. What we take into account:

  • Where the damage is and how we get to it
  • Whether old repairs or coatings need taking off
  • The type of damage
  • How many items we do on one visit

A repair is priced on what needs doing, not your postcode. You will see the full price before booking.

Quotes from your photos

Photographing the damage takes a minute. Please include:

  • Any earlier repairs or coatings
  • One sharp close-up of the damage
  • One picture of the entire bath
  • What it’s made of, if you know

Upload a photo of the damage and one of the whole item, with your EX20 postcode, and we’ll reply with a fixed quote.

Bath re-enamelling in Jacobstowe, done in place

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Our technicians work on basins & shower trays, pressed steel baths and cast iron baths, and common reasons people get in touch are lots of chips and rust spots and worn patches where water runs and sits.

Every job is backed for twelve months in Jacobstowe and everywhere else. If something goes wrong with the work, we come back.

Basin with yellowed glaze resurfaced to a clean white finish
Location
Jacobstowe (EX20)
County
Devon
Guarantee
12 months on all our work
Quotes
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • Dry the bath after use to stop limescale
  • Keep suction mats out of the bath
  • Get any chip repaired quickly
  • Clean with a soft cloth and mild detergent

Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

About Jacobstowe

Jacobstowe is about 18 miles south-east of Bideford, in Devon. Whether you’re in the middle of Jacobstowe or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Jacobstowe is one of 586 places in Devon we cover.

Here we cover the EX20 postcode area. Jacobstowe is on the A3072, which makes it straightforward to reach. Other places close to Jacobstowe include Exbourne (1 mile east), Folly Gate (2 miles south), Monkokehampton (2 miles north), Sampford Chapple (3 miles east) and Sampford Courtenay (3 miles east). Larger places within reach include Okehampton (4 miles south), Crediton (15 miles east), Great Torrington (12 miles north-west), Holsworthy (15 miles west), Hatherleigh (3 miles north-west) and North Tawton (5 miles east).

Landmarks near Jacobstowe

Around Jacobstowe, we work in homes near Exbourne Church of England Primary School and Church of St James and the streets around them. The closest station to Jacobstowe is Okehampton Interchange station, about 3.9 miles south. Other landmarks nearby include Okehampton Community Hospital (3.8 miles south) and War Horse Valley Country Farm Park (3.5 miles north-west).

Map of Jacobstowe © OpenStreetMap contributors

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which usually takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Keep a parking space free if you can
  • Tell us about parking, stairs or access
  • Ensure the room can be ventilated

Get a quote

If you are in Jacobstowe and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Related advice

When a repair is not the answer

We won’t take on work that will not last, so these are the limits:

  • A bath that is rusted through
  • Problems we can’t see until an old finish comes off
  • Acrylic that moves when you stand in it

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths

Should you replace it?

Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing typically wins. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why book with us

  • We will tell you if it’s not worth repairing
  • Free fixed quotes from pictures
  • Colours mixed by hand to suit your surface
  • Repair technicians who travel to you, UK-wide

Take a look at our full price list or resurfacing vs replacement cost guide.

Jacobstowe: your questions answered

Can you quote from pictures?

Usually, yes. A close-up and a wider photo are enough to give a fixed price.

Do you resurface freestanding baths?

Yes. We can do the inside and outside.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

Does the bath have to be removed?

Not at all. Everything is done in your bathroom, with the room masked and ventilated.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.

How long does re-enamelling take?

One day for most baths and can be used the day after. We’ll confirm timings when we quote.

Can you fix a peeling bath coating?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.

Materials and what they mean for the repair

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.