Highland · Scotland
Bath Re-enamelling for Keiss homes
Full bath re-enamelling and resurfacing at your home in Keiss, with a one-year guarantee on every repair.
- Resurfacing from £350
- A coating lifting around the plughole
- Brown or grey marks that do not clean off
Repairing versus replacing in Keiss
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why us?
- Fixed prices from your photos
- Same prices wherever you are
- Every repair guaranteed for a year
- Nothing taken out or refitted
See our full price list and guide to resurfacing and replacement costs.
How we handle bath re-enamelling in Keiss
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Whether it’s wear marks under the taps and brown or grey marks that don’t clean off, we can help, whatever the material.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Keiss (KW1)
- Area hub
- Highland
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow the best part of a day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
Get a quote
Upload a picture of the damage and one of the whole item, with your KW1 postcode, and we’ll come back with a fixed quote.
Related advice
Landlord and trade work in Keiss
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
Signs you need bath re-enamelling in Keiss
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Signs it’s time to call us include:
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
- A roll-top that is seen better days
- Several chips and rust patches
Comparing quotes
- Who turns up on the day
- What preparation is included
- When it can be used again
- How to care for the finish
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job, from your photos. What matters most is:
- How hard the colour is to match
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- How easy the damage is to reach
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Details of any past repairs
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- One picture of the entire bath
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Other services in Keiss
Honest limits
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Keiss questions
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do the materials smell?
Expect a mild smell while we’re working that clears as it cures.
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one, so let us know about it.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Stick to gentle, non-abrasive cleaners
- Don’t leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
- Do not let dyes or oils sit on the finish
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
About Keiss
Keiss is about 15 miles east of Thurso, in Highland. Jobs in Keiss are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Keiss is one of 253 towns and villages in Highland we cover.
Postcode districts we cover here: KW1. Jobs here include addresses on High Street, South Street and Robertson Crescent. We also cover the places around Keiss: Reiss (4 miles south), Ackergillshore (4 miles south), Hastigrow (5 miles west), Staxigoe (6 miles south-east) and Haster (6 miles south). Remote and island addresses take a little more planning, so call us to arrange it.
Around Keiss
In Keiss, that means homes near Church of Scotland. A little further out are Caithness Broch Centre (2 miles north-east) and Keiss Castle (0.7 miles north-east). The countryside around Keiss includes Loch of Wester.
About our accreditations · Every repair comes with a one-year guarantee.
