Warwickshire · England
Bath Re-enamelling in Kemps Green
Bath re-enamelling for Kemps Green, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- Chips and rust in more than one place
Bath re-enamelling in Kemps Green, done in place
We do not move the bath, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. Our repair technicians work on Victorian roll-tops, pressed steel baths and cast iron baths, and people most often call us about thin, worn enamel in places and an old resurfacing that’s failing.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Kemps Green (B94)
- Region
- Warwickshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Any earlier repairs that need removing first
- What kind of damage it is
- How much damage there is
- The material
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Getting a price from pictures
Phone photos are fine, there is no need for anything special. Just make sure we can see:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- One picture of the whole bath
- What it’s made of, if you know
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
About Kemps Green
Kemps Green is about 5 miles south of Solihull, in Warwickshire. Clients in Kemps Green get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Kemps Green is one of 324 towns and villages in Warwickshire we cover. Our nearest city page is Birmingham, about 11 miles away.
Jobs in B94 are booked in the same way as anywhere else. From Nuthurst Road and Kemps Green Road or a nearby road, a technician can come to you. Neighbouring places we cover include Nuthurst (1 mile north-east), Lapworth (1 mile north-east), Hockley Heath (2 miles north), Buckley Green (2 miles south-east) and Beaudesert (2 miles south). Further out, we also cover Warwick (10 miles east), Royal Leamington Spa (11 miles east), Stratford-upon-Avon (10 miles south), Leamington Spa (11 miles east), Kenilworth (9 miles east) and Fordbridge (11 miles north).
Near you in Kemps Green
The nearest railway station is Danzey station, about 1.4 miles west of the centre. Other landmarks nearby include Earlswood Village Museum (3 miles north-west) and Morton Bagot Castle (4.1 miles south-west). Not far away are Henley Sidings.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Colour mixed on the day to match
- One-year guarantee on every repair
- Everything repaired in place
- Dust sheets down, tidy finish
Read our prices page or guide to resurfacing and replacement costs.
Also near Kemps Green
Also in Kemps Green
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Rinse off hair dye, oils and bath bombs straight away
- Don’t use the bath until it has fully cured
- Store bottles off the bath
- A dripping tap should be fixed promptly
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes most of the day. If we find something your pictures didn’t show, we will explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Open a window if you can
- Tell us about parking, stairs or access
Get a quote
To get a price, send a couple of photos using our quote form or call us. We will say immediately if a repair is the right fix.
Read more
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
Send us pictures and we will tell you honestly before you book.
What we work on
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Kemps Green questions
What areas do you cover?
We work UK-wide. Prices don’t change with location.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What happens after I send pictures?
We come back with a fixed quote, plus dates. You’re under no obligation.
How much does bath re-enamelling cost in Kemps Green?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Signs you need bath re-enamelling in Kemps Green
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Typical reasons for a call-out include:
- A period or roll-top bath worth keeping
- A coloured bath you want in white
- Lots of chips and rust spots
- Stains that will not shift
Comparing quotes
- How the room is protected while they work
- Aftercare advice
- Whether the price covers travel
- What happens if the damage is worse than the pictures show
About our accreditations · Every repair comes with a one-year guarantee.
