Warwickshire · England
Bath re-enamelling & resurfacing in Nuthurst, Warwickshire
Local bath re-enamelling for Nuthurst: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that is seen better days
Bath re-enamelling in Nuthurst without replacing anything
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Whether it’s a bath that stays dull however much you clean it and a roll-top that’s seen better days, we can generally put it right.
All our work is covered by a one-year guarantee, wherever you are in Warwickshire.
- Where
- Nuthurst (B94)
- County
- Warwickshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Nuthurst
Nuthurst is about 5 miles south of Solihull, in Warwickshire. Whether you’re in the middle of Nuthurst or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Nuthurst is one of 324 places in Warwickshire we cover. Our nearest city page is Birmingham, about 10 miles away.
Our visits in B94 are booked in the same way as anywhere else. Close by, we cover Lapworth (1 mile south-east), Hockley Heath (1 mile north), Kemps Green (1 mile south-west), Packwood (1 mile north-east) and Packwood Gullet (2 miles north-east). Within a short drive, we also cover Warwick (9 miles south-east), Royal Leamington Spa (11 miles east), Stratford-upon-Avon (11 miles south), Bedworth (15 miles north-east), Leamington Spa (11 miles east) and Kenilworth (8 miles east).
Near you in Nuthurst
Around Nuthurst, we work in homes near Dorridge Wood, Hockley Heath Academy and Church of Saint Thomas, among other places. The nearest railway station is Lapworth station, about 2 miles east of the centre. Other landmarks nearby include Baddesley Clinton (2.7 miles east) and Solihull Hospital (5.1 miles north). Open spaces near Nuthurst include Henley Sidings.
What affects the price in Nuthurst
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- What kind of damage it is
- How many items we do on one visit
- What the surface is made of
- Access to the area
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- A photo taken from further back
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- Any details about the material
Email us a picture of the damage and a wider shot of the whole item, and tell us you’re in Nuthurst, and we will come back with a fixed quote.
Nuthurst questions
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
Does re-enamelling smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
The process
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow most of the day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Tell us about parking, stairs or access
- Open a window if you can
- Mention if the room is upstairs or in a flat
Ask for a price
If you are in Nuthurst and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
When we would advise against a repair
To be straight with you, some problems need a different fix:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Nuthurst
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Common problems we fix in Nuthurst
Frequently the bath has just had decades of use. The body of the bath is generally perfectly sound.
These are the problems we are asked about most:
- An original cast iron bath that needs restoring
- Brown or grey marks that don’t clean off
- Thin, worn enamel in places
- An outdated colour you’d like to change
Before you book anyone
- A fixed price, and whether VAT is included
- What happens if they find more damage
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
Repairing versus replacing in Nuthurst
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with nothing added on the day.
What you get with us
- Free fixed quotes from pictures
- A year’s guarantee on all work
- We’ll tell you if it’s not worth repairing
- CHAS and Constructionline accredited
Take a look at our full price list or bath cost comparison.
Places near Nuthurst
More services for Nuthurst
About our accreditations · Every repair comes with a one-year guarantee.
