Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Kenmore, Perth and Kinross
Full bath re-enamelling and resurfacing in Kenmore, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that is failing
- Several chips and rust patches
When to call us in Kenmore
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Send us a picture if you notice any of these:
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
Questions to ask before booking
- What preparation is included
- How long it needs to cure
- Whether the price covers travel
- Whether the price is fixed and includes VAT
How we handle bath re-enamelling in Kenmore
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on cast iron baths, acrylic baths and Victorian roll-tops, and the jobs we see most are a coloured bath you want in white and a roll-top that’s seen better days.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Kenmore (PH15)
- County
- Perth and Kinross
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When we would advise against a repair
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- A bath that is rusted through
- Leaks from fittings rather than the bath
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Common questions in Kenmore
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Do you cover Kenmore?
Yes. We work across the UK and come to Kenmore. Send us pictures for a fixed quote, or call 0345 017 0787.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
About Kenmore
Kenmore is about 24 miles north-west of Perth, in Perth and Kinross. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 107 towns and villages in Perth and Kinross. Our nearest city page is Glasgow, about 52 miles away.
Postcode districts we cover here: PH15. You’ll find streets such as The Square, Taymouth Drive and Pier Road, and we cover them all. We also travel to Acharn (1 mile south-west), Fearnan (3 miles west), Boreland (4 miles west), Aberfeldy (6 miles north-east) and Little Ballinluig (9 miles north-east).
Local landmarks in Kenmore
Our customers here include homes close to Kenmore Free Church, among other places. Nearby you will also find Scottish Crannog Centre (0.5 miles south-west) and Taymouth Castle (under half a mile north). Not far away are Drummond Hill.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the next day.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Read more
Should you replace it?
A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
What you get with us
- Everything repaired in place
- Work done at your home or business
- Rooms protected and left tidy
- CHAS and Constructionline accredited
Read our prices page and bath cost comparison.
Towns and villages near Kenmore
More services for Kenmore
Landlords, agents and businesses in Kenmore
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
How to care for the repair
Once the work has cured, treat it gently:
- A quick wipe after use keeps limescale away
- Store bottles off the bath
- Respect the curing time we give you
- Never use suction bath mats
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What affects the price in Kenmore
Prices start from £350. Prices are worked out job by job, from your pictures. What matters most is:
- The type of damage
- Any earlier repairs that need removing first
- What the surface is made of
- Where the damage is and how we get to it
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from pictures
You can take the pictures on your phone. Ensure they show:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
About our accreditations · Every repair comes with a one-year guarantee.
