Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Acharn, Perth and Kinross
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Acharn. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Bath re-enamelling in Acharn without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We are often asked to fix worn patches where water runs and sits and a peeling or bubbling previous coating, in basins & shower trays, acrylic baths and Victorian roll-tops.
Big or small, it’s backed by a one-year guarantee.
- Location
- Acharn (PH15)
- County
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
Arrival times are agreed in advance. Once we are there, the work takes the best part of a day for most jobs. We leave the room clean and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
- Keep pets and children out of the room while we work
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
How to care for the repair
Once the work has cured, treat it gently:
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
- Do not leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Acharn questions
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we’ll plan for it.
What happens once I’ve sent pictures?
You’ll get a fixed quote back, typically with dates to choose from. There is no obligation to book.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and we’ll quote them together.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What we can’t put right
It helps to know what we can’t do:
- A metal bath with a through crack
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Should you replace it?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why Acharn clients choose us
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
- One-year guarantee on every repair
- Fixed prices from your pictures
Read our pricing or guide to resurfacing and replacement costs.
Towns and villages near Acharn
Other services in Acharn
Landlord and trade work in Acharn
If you manage property in Acharn, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
What we’re called out for in Acharn
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
You may need us if you’ve spotted any of these:
- Wear marks under the taps
- Stains that will not shift
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
Questions to ask before booking
- Whether there are any call-out or travel charges
- How changes to the job are handled
- Aftercare advice
- When it can be used again
Prices and what affects them
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- The material
- How many areas need work
- How many items we do on one visit
- The type of damage
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Quotes from your photos
Phone pictures are fine, there is no need for anything special. Ensure they show:
- Natural light rather than flash
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- A wider photo showing the entire bath
To get a price, send two or three photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Where we work around Acharn
Acharn is about 25 miles north-west of Perth, in Perth and Kinross. Wherever you are in the PH15 postcode area, we come to you. We work in all 107 towns and villages across Perth and Kinross. Our jobs stretch from Acharn to Glasgow (51 miles away).
Our visits in PH15 are booked in the same way as anywhere else. Close by, we cover Kenmore (1 mile north-east), Fearnan (2 miles west), Boreland (3 miles west), Aberfeldy (7 miles north-east) and Little Ballinluig (11 miles north-east). We also work in nearby towns such as Crieff (15 miles south-east), Pitlochry (14 miles north-east) and Comrie (14 miles south).
Local landmarks in Acharn
We visit homes around Kenmore Parish Church and the streets around them. Further afield, we also cover the area around Taymouth Castle (1.5 miles north-east) and Scottish Crannog Centre (0.8 miles north-east). Open spaces near Acharn include Drummond Hill.
About our accreditations · Every repair comes with a one-year guarantee.
