Highland · Scotland
Bath re-enamelling & resurfacing in Kilmaluag, Highland
Damaged bath in Kilmaluag? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Worn patches where water runs and sits
How to look after the repair
Aftercare is simple:
- Keep suction mats out of the bath
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
- Dry the bath after use to stop limescale
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Bath re-enamelling in Kilmaluag, done in place
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. There is no removal, plumbing or tiling involved. We regularly repair basins & shower trays, pressed steel baths and acrylic baths, and the jobs we see most are thin, worn enamel in places and a roll-top that’s seen better days.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Kilmaluag (IV51)
- Area hub
- Highland
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Kilmaluag
Also in Kilmaluag
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
- A cast iron or steel bath that’s cracked right through
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
How the visit works
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. It generally takes the best part of a day, and you are welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
- Clear the area around the damage
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Repair or replace in Kilmaluag?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Kilmaluag
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
- A year’s guarantee on all work
- Everything repaired in place
Take a look at our prices page and guide to resurfacing and replacement costs.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Kilmaluag and the surrounding area
Kilmaluag is in Highland. We visit homes and businesses in Kilmaluag and the surrounding area, so nothing has to leave your home. Kilmaluag is one of 253 places in Highland where we work.
All of IV51 is covered. Nearby, we also work in Staffin (5 miles south-east), Uig (7 miles south-west), Clachamish (13 miles south), An t-Aodann Ban (15 miles south) and Portree (19 miles south). If you’re somewhere remote, ring us first and we will plan the trip.
What’s near Kilmaluag
Around Kilmaluag, we work in homes near Kilmaluag Retreat, among other places. A little further out are Duntulm Castle (2.2 miles west) and Skye Museum of Island Life (3.3 miles south-west). Green spaces nearby include Loch Droighinn.
Common questions in Kilmaluag
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you cover Kilmaluag?
Yes, we do. We send a technician to Kilmaluag for every job, and the price is the same as everywhere else.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Which areas do you work in?
We work UK-wide. Our prices are the same everywhere.
How do I get a price for bath re-enamelling in Kilmaluag?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Signs you need bath re-enamelling in Kilmaluag
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Send us a picture if you notice any of these:
- Wear marks under the taps
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
What to look for in a quote
- What happens if the damage is worse than the pictures show
- Whether there are any call-out or travel charges
- Aftercare advice
- What protection goes down before work starts
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
