Somerset · England
Bath Re-enamelling for Kilmersdon homes
Local bath re-enamelling for Kilmersdon: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Several chips and rust patches
About our bath re-enamelling in Kilmersdon
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. Common call-outs are for several chips and rust patches and enamel that’s lost its shine and feels rough, on pressed steel baths, acrylic baths and basins & shower trays.
Every repair is covered by a one-year guarantee.
- Area
- Kilmersdon (BA3)
- Region
- Somerset
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Keep pets and children out of the room while we work
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
What we cannot put right
We will always be straight with you, so here’s what a repair cannot fix:
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Kilmersdon
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Kilmersdon. The price depends on:
- Whether old repairs or coatings need taking off
- The material and finish
- The type of damage
- Unusual colours or finishes
We charge the same wherever you are, so there is no premium for Kilmersdon. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- Any earlier repairs or coatings
- The material, if you know it
- Natural light rather than flash
- The postcode, so we can plan the visit
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Places near Kilmersdon
Also in Kilmersdon
For landlords and businesses
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Why us?
- Straight answers about what a repair can do
- Fixed prices from your photos
- Most jobs done in one visit
- Rooms protected and left tidy
Take a look at our prices page or bath cost comparison.
Our work in Kilmersdon
Kilmersdon is about 2 miles south-east of Midsomer Norton, in Somerset. From the centre of Kilmersdon to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 640 towns and villages in Somerset.
Every address in BA3 is covered, from the main roads to the quietest streets. From Manor Close, Silver Street and Hoare's Lane or a nearby road, a technician can come to you. Close by, we cover Haydon (1 mile north-west), Writhlington (1 mile north), Green Parlour (2 miles north-east), Westfield (2 miles north) and Radstock (2 miles north-west). Larger places within reach include Frome (6 miles south-east), Wells (10 miles south-west), Shepton Mallet (7 miles south-west), Glastonbury (15 miles south-west), Cheddar (15 miles west) and Wincanton (15 miles south).
Near you in Kilmersdon
Locally, our jobs take us to homes close to Newbury Manor School, Kilmersdon Church of England Primary School and Church of St Peter and St Paul, among other places. Further afield, we also cover the area around Paulton Memorial Hospital (3.2 miles north-west) and Nunney Castle (4.7 miles south-east). Not far away are Vallis Vale.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Signs you need bath re-enamelling in Kilmersdon
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
The most common problems we’re called about are:
- Brown or grey marks that don’t clean off
- Wear marks under the taps
- Chips and rust in more than one place
- An outdated colour you’d like to change
Before you book anyone
- Aftercare advice
- What happens if the damage is worse than the photos show
- Who will actually do the work
- Whether the price is fixed and includes VAT
Aftercare tips
Aftercare is simple, and it makes a real difference:
- A dripping tap should be fixed promptly
- Have chips seen to early
- Use washing-up liquid and a soft cloth
- Respect the curing time we give you
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
FAQs for Kilmersdon
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up and a photo of the entire item and your postcode.
Which areas do you work in?
We cover the whole UK, including Kilmersdon and the rest of Somerset. Just include your postcode and we’ll offer you dates.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
It’s been repaired before. Can you still fix it?
Typically, yes. The old repair comes out first.
About our accreditations · Every repair comes with a one-year guarantee.
