Somerset · England

Bath re-enamelling & resurfacing in Haydon, Somerset

Full bath re-enamelling and resurfacing in Haydon, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • An old resurfacing that is failing
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Haydon

About our bath re-enamelling in Haydon

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s several chips and rust patches and a bath in a colour that no longer suits, we can usually put it right, whatever the material.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.

Stained basin resurfaced to clean white (before and after)
Area
Haydon (BA3)
Region
Somerset
Warranty
12 months on all our work
Quote
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

Honest limits

To be straight with you, some problems need a different fix:

  • A poorly supported acrylic bath, until it’s firmed up
  • Leaking taps or wastes (a plumber’s job)
  • A cast iron or steel bath that’s cracked right through

If in doubt, send pictures and we’ll say what we think.

What we work on

  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths

Should you replace it?

A replacement often means several trades over several days. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Why Haydon clients choose us

  • Typically one visit, start to finish
  • We will tell you if it’s not worth repairing
  • Nothing taken out or refitted
  • Every repair guaranteed for a year

Read our pricing and resurfacing vs replacement cost guide.

Materials and what they mean for the repair

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

What we do, step by step

Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the next day.

How to prepare

  • Mention if the room is upstairs or in a flat
  • Let the surface dry out before the visit
  • Tell us about parking, stairs or access

How to get a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a free quote

Related advice

Prices and what affects them

Resurfacing from £350. You won’t pay by the hour. The price is based on:

  • The colour and finish to match
  • How many items we do on one visit
  • What kind of damage it is
  • Where the damage is and how we get to it

Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

How to get a fixed price

Good pictures mean an accurate price. Here’s what we find most useful:

  • Whether it’s been repaired or coated before
  • One picture of the whole bath
  • A clear, close picture of the problem area
  • The material, if you know it

For a price in Haydon, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Haydon: your questions answered

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Are there extra charges for Haydon?

No. Our quotes include travel, with the same prices everywhere we work.

Do you work in Haydon?

Yes, we do. We send a technician to Haydon for every job, with no extra charge for travel.

How do I book?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Can you repair something that’s been repaired before?

Yes, we often do. It can add a little time, which we include in the quote.

Can you fix a peeling bath coating?

Normally, yes. The old coating comes off before we resurface it. Mention it when you send photos.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Is there a guarantee?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Our work in Haydon

Haydon is about 1 mile east of Midsomer Norton, in Somerset. Customers in Haydon get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We cover all 640 towns and villages in Somerset.

Postcode districts we cover here: BA3. Whether you live on Kilmersdon Road, Colliers Way and Grove Wood Road or a nearby road, we can come to you. We also cover the places around Haydon: Radstock (1 mile north-west), Westfield (1 mile north), Writhlington (1 mile north-east), Kilmersdon (1 mile south-east) and Lower Writhlington (1 mile north-east). We also work in nearby towns such as Frome (7 miles south-east), Wells (10 miles south-west), Shepton Mallet (8 miles south-west), Glastonbury (15 miles south-west), Cheddar (14 miles west) and Castle Cary (14 miles south).

Near you in Haydon

Typical jobs here are in homes near Mendip Studio School, Parish Church of St Nicholas and The Railway Public House. Nearby you’ll also find Paulton Memorial Hospital (2.1 miles north-west). Not far away are Stephen's Vale Nature Reserve and Lechmere Water.

Map of Haydon © OpenStreetMap contributors

Aftercare tips

After the repair has cured, a few habits help it last:

  • Don’t let dyes or oils sit on the finish
  • Use washing-up liquid and a soft cloth
  • Never use suction bath mats
  • Store bottles off the bath

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.