Barnsley · England
Bath Repair for Kine Moor homes
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Kine Moor. Free, fixed quotes from your pictures.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- A hole punched through by something heavy
How we handle bath repair in Kine Moor
Most of our bath repairs take a few hours, and the bath is back in use the next day. You will not need a plumber or tiler, because nothing is disconnected. Typical jobs include rust spots around the plughole and chips along the edge of the bath, on whirlpool & spa baths, acrylic and cast iron enamel.
Every repair comes with our one-year guarantee, wherever you are in Barnsley.
- Location
- Kine Moor (S75, S36)
- Region
- Barnsley
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Stick to mild cleaners and a soft cloth
- Do not scrub with anything abrasive
- Cover the bath during DIY or decorating
- Rinse it down after each bath
A repaired bath needs no special treatment. Skip bleach and gritty creams and give it a rinse after each bath.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Landlord and trade work in Kine Moor
Landlords, letting agents and housing providers in Kine Moor use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
If you manage property in Kine Moor, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
What we do, step by step
Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow a few hours. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
How we price bath repair
Repairs from £95. Prices are worked out job by job. What matters most is:
- What kind of damage it is
- The material and finish
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Send pictures for a quote
When you take your pictures, a few simple things make all the difference:
- The postcode, so we can plan the visit
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- A photo taken from further back
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
FAQs for Kine Moor
How much does bath repair cost in Kine Moor?
Repairs from £95. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
When a repair is not the answer
To be straight with you, some problems need a different fix:
- Wear across the entire surface, which needs re-enamelling
- Metal that has corroded all the way through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us photos and we will tell you honestly before booking.
Materials we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
Also near Kine Moor
Also in Kine Moor
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Covering Kine Moor
Kine Moor is about 2 miles north-east of Penistone, in Barnsley. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 94 towns and villages in Barnsley. Our jobs stretch from Kine Moor to Leeds (19 miles away).
Every address in S75 and S36 is covered. We regularly work on streets such as Barnsley Road and Kine Moor Lane and the roads around them. We also cover the places around Kine Moor: Noblethorpe (1 mile north-east), Silkstone Common (1 mile east), Silkstone (1 mile north-east), Oxspring (2 miles south-west) and Eastfield (2 miles south-east). Within a short drive, we also cover Barnsley (4 miles east), Wombwell (8 miles east), Wath upon Dearne (10 miles east), Shaw Lands (4 miles east), Hoyland (6 miles south-east) and Worsbrough (5 miles east).
Landmarks near Kine Moor
Locally, our jobs take us to homes close to Church of All Saints, Silkstone Primary School and Penistone Grammar School and the streets around them. The nearest railway station is Silkstone Common station, roughly 0.8 miles east of the centre. Further afield, we also cover the area around Victoria Jubilee Museum (2.2 miles north) and Barnsley Hospital (3.7 miles north-east).
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- CHAS and Constructionline accredited
- Same prices wherever you are
- Colour-matched on site
- A fixed quote before booking
Take a look at our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
