Gloucestershire · England
Bath Re-enamelling for King's Stanley homes
Bath re-enamelling for King's Stanley, without a refit. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A coating lifting around the plughole
About our bath re-enamelling in King's Stanley
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair pressed steel baths, acrylic baths and cast iron baths, and common reasons people contact us are a coating lifting around the plughole and staining under the taps and around the waste.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Where
- King's Stanley (GL10)
- Region
- Gloucestershire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
How it works
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the job itself takes most of the day. Before we leave, we explain the curing time and the aftercare.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the next day.
Before we arrive
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
How to get a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Repairing versus replacing in King's Stanley
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
- Straight answers about what a repair can do
- Fixed prices from your photos
See our pricing and bath cost comparison.
Signs you need bath re-enamelling in King's Stanley
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
People usually call us when they notice something like this:
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- Lots of chips and rust spots
What your quote should include
- If travel is included in the price
- What protection goes down before work starts
- What happens if the damage is worse than the photos show
- How long the guarantee is and what it covers
How to care for the repair
It’s all simple stuff:
- Have chips seen to early
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
- Fix dripping taps quickly
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Where we work around King's Stanley
King's Stanley is about 2 miles south-west of Stroud, in Gloucestershire. We travel to homes and businesses in King's Stanley and the surrounding area, so you do not need to take anything anywhere. We cover 470 places across Gloucestershire. You can also see our page for Birmingham, about 54 miles away.
Our repair technicians cover all of the GL10 postcode area. That includes homes on High Street, Deacons Close and Church Street and the roads around them. If you’re just outside King's Stanley, we cover Leonard Stanley (1 mile west), Middleyard (1 mile south-east), Ryeford (1 mile north-east), Ebley (1 mile north-east) and Selsley (1 mile east). Larger places within reach include Cheltenham (14 miles north-east), Gloucester (9 miles north), St Paul's (14 miles north-east), Cirencester (13 miles east), Lansdown (14 miles north-east) and Fairview (15 miles north-east).
Around King's Stanley
Locally, our jobs take us to homes close to Maidenhill School, Church of St George and The Kings Head pub, among other places. You will also find Five Acre Grove (1.3 miles west) and Leonard Stanley Church of England Primary School (within half a mile west). The closest station to King's Stanley is Stonehouse station, about 1.1 miles north of the centre. A little further out are Stratford Park (2.5 miles north-east) and Haresfield Mount (4.3 miles north). Open spaces near King's Stanley include Coaley Peak and Woodchester Park.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
When a repair isn’t the answer
Before you book, it’s worth knowing the limits too:
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
King's Stanley: your questions answered
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Gloucestershire.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Landlord and trade work in King's Stanley
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Towns and villages near King's Stanley
More services for King's Stanley
About our accreditations · Every repair comes with a one-year guarantee.
