Gloucestershire · England
Bath Re-enamelling for Leonard Stanley homes
Problem with your bath in Leonard Stanley? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
Bath re-enamelling in Leonard Stanley, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Our repair technicians work on pressed steel baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are lots of chips and rust spots and a dull, rough surface that won’t come clean.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Area
- Leonard Stanley (GL10)
- Area hub
- Gloucestershire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in Leonard Stanley
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Customers generally contact us about:
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
What your quote should include
- How to look after the finish
- When it can be used again
- Whether they match the colour on site
- Whether a trained technician does the job
Where we work around Leonard Stanley
Leonard Stanley is about 2 miles south-west of Stroud, in Gloucestershire. From the centre of Leonard Stanley to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Leonard Stanley is one of 470 towns and villages in Gloucestershire we cover. You can also see our page for Birmingham, about 54 miles away.
Here we cover the GL10 postcode area. Whether you live on The Street, Church Road and Dozule Close or anywhere nearby, a technician can come to you. If you’re just outside Leonard Stanley, we cover King's Stanley (1 mile east), Middleyard (1 mile east), Ryeford (1 mile north-east), Ebley (1 mile north-east) and Stonehouse (2 miles north). Within a short drive, we also cover Cheltenham (14 miles north-east), Gloucester (9 miles north), St Paul's (15 miles north-east), Cirencester (14 miles east), Lansdown (14 miles north-east) and Fairview (15 miles north-east).
Landmarks near Leonard Stanley
Locally, our jobs take us to homes close to Five Acre Grove, Leonard Stanley Priory and Maidenhill School. You will also find The Kings Head pub (under half a mile east) and Leonard Stanley Church of England Primary School (less than half a mile north-east). The nearest railway station is Stonehouse station, about 1.2 miles north. Well-known places in the area include Standish Hospital (2.2 miles north) and Haresfield Mount (4.4 miles north). For a walk, there’s Woodchester Park and Coaley Peak.
Towns and villages near Leonard Stanley
Also in Leonard Stanley
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Wipe the bath dry after use in hard water areas
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Leonard Stanley: your questions answered
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How do I get a price for bath re-enamelling in Leonard Stanley?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How long does re-enamelling take?
One day for most baths, ready the following day. We give you timings with the quote.
What affects the price in Leonard Stanley
Resurfacing from £350. There’s no area surcharge for Leonard Stanley. The price reflects:
- How many items we do on one visit
- Any earlier repairs that need removing first
- How many areas need work
- The material
The price reflects the work involved, not where you live. The full price is agreed before booking.
Getting a price from pictures
We price nearly every job from photos. This is what we need:
- Where you are, by postcode
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- Natural light rather than flash
Send us photos of the damage and a wider shot of the entire item, with your GL10 postcode, and we will come back with a fixed quote.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which usually takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know which floor the room is on
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
What a repair can’t fix
A repair is not right for every job, for example:
- Holes rusted through the metal
- A metal bath with a through crack
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Landlords, agents and businesses in Leonard Stanley
We are used to working with agents and managing companies. Send the address, pictures and access details.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
