Gloucestershire · England
Bath Re-enamelling for Ryeford homes
Bath re-enamelling across Ryeford and nearby, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- A roll-top that’s seen better days
- Thin, worn enamel in places
How the visit works
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow the best part of a day. Before leaving, we tell you when it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
How we handle bath re-enamelling in Ryeford
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We are frequently asked to fix an original cast iron bath that needs restoring and brown or grey marks that don’t clean off, across pressed steel baths, acrylic baths and cast iron baths.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Ryeford (GL10)
- Area hub
- Gloucestershire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Ryeford
What else we do in Ryeford
Do you need bath re-enamelling in Ryeford?
Many baths we resurface have simply been well used. The body of the bath is generally perfectly sound.
Send us a photo if you notice any of these:
- A roll-top that is seen better days
- A coating lifting around the plughole
- An outdated colour you’d like to change
- Thin, worn enamel in places
What to look for in a quote
- How long the guarantee is and what it covers
- How changes to the job are handled
- What protection goes down before work starts
- What aftercare is recommended
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
What bath re-enamelling costs
Prices start from £350. We price every job individually, from your pictures. The main factors are:
- The material
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- How easy the damage is to reach
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
Before you send pictures, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- The material, if you know it
- A wider photo showing the whole bath
- A clear, close picture of the problem area
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Respect the curing time we give you
- Do not let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
- Use washing-up liquid and a soft cloth
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
FAQs for Ryeford
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
What areas do you cover?
The entire UK, including all of Gloucestershire. Just include your postcode and we will offer you dates.
Do you work in Ryeford?
Yes. We work across the UK and come to Ryeford. Send pictures and we will quote, or call 0345 017 0787.
How long is the bath unusable?
Generally one day, with the bath ready the next day. A badly pitted bath can need a second day.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
For landlords and businesses
If you manage property in Ryeford, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Covering Ryeford
Ryeford is about 2 miles west of Stroud, in Gloucestershire. From the centre of Ryeford to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 470 towns and villages in Gloucestershire. Our nearest city page is Birmingham, about 53 miles away.
Jobs in GL10 are booked in the same way as anywhere else. Neighbouring places we cover include Ebley (1 mile east), King's Stanley (1 mile south-west), Westrip (1 mile north), Cashes Green (1 mile north-east) and Leonard Stanley (1 mile south-west). Larger places within reach include Cheltenham (13 miles north-east), Gloucester (8 miles north), St Paul's (14 miles north-east), Cirencester (13 miles east), Lansdown (13 miles north-east) and Fairview (14 miles north-east).
Around Ryeford
Typical jobs here are in homes near Maidenhill School, The Woolpack Inn and Foxmoor Primary School. Other local landmarks include Church of St George (0.5 miles south-west) and Five Acre Grove (1.5 miles west). For rail, the closest station is Stonehouse station, roughly 0.6 miles north-west. Nearby you will also find Stratford Park (2 miles east) and Haresfield Mount (3.6 miles north). Open spaces near Ryeford include Coaley Peak and Woodchester Park.
About our accreditations · Every repair comes with a one-year guarantee.
