Wrexham · Wales
Bath Re-enamelling in Kings Mills
Full bath re-enamelling and resurfacing at your home in Kings Mills, with a one-year guarantee on every repair.
- Resurfacing from £350
- An old resurfacing that is failing
- Enamel that’s lost its shine and feels rough
How we handle bath re-enamelling in Kings Mills
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Our technicians work on Victorian roll-tops, basins & shower trays and cast iron baths, and common reasons people contact us are an outdated colour you’d like to change and a bath that stays dull however much you clean it.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Kings Mills (LL13)
- Region
- Wrexham
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What bath re-enamelling costs
Resurfacing from £350. We price every job individually. What matters most is:
- What kind of damage it is
- How many areas need work
- Access to the area
- Doing more than one item at once
We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- Details of any past repairs
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- Something in shot to show the size
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
When to call us in Kings Mills
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is generally as strong as ever.
Signs it’s time to call us include:
- Lots of chips and rust spots
- A coloured bath you want in white
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
What your quote should include
- What preparation is included
- Who turns up on the day
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
Covering Kings Mills
Kings Mills is about 1 mile south of Wrexham, in Wrexham. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in 115 places across Wrexham, from the larger towns to small villages. You can also see our page for Liverpool, about 26 miles away.
All of LL13 is covered, from the main roads to the quietest streets. You’ll find streets such as Frog Lane, Range Road and Norman Road. Nearby, we also work in Hightown (1 mile north-west), The Dunks (1 mile north), Caia Park (1 mile north), Marchwiel (1 mile south-east) and Wrexham (1 mile north). Further out, we also cover Rhosllannerchrugog (4 miles south-west), Gwersyllt (3 miles north-west), Little Mountain (3 miles north-west), Pentredŵr (4 miles south-west), Llay (4 miles north) and Pant (4 miles south-west).
Around Kings Mills
In Kings Mills, that means homes near Rhosnesni High School, Church of St Mark and St Giles' Church, among other places. Also close by are Gwenfro Community Primary School (less than half a mile north-east), Bellevue Park (1 mile north-west), The Kings Mills pub (within half a mile north) and Grove Park School (1.1 miles north-west). The nearest railway station is Wrexham Central station, roughly 1.2 miles north-west. Further afield, we also cover the area around Wrexham Maelor Hospital (1.6 miles north-west) and Bromfield Castle (1.1 miles north-east). For a walk, there is Bersham Bank and Pant-yr-ochain Big Pool.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
What happens on the day
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the work takes most of the day. At the end we talk you through how soon it can be used and how to look after it.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Keep a parking space free if you can
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Advice
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
FAQs for Kings Mills
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Wrexham.
What areas do you cover?
Across the UK, and that includes Kings Mills. Our prices are the same everywhere.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How much does bath re-enamelling cost in Kings Mills?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up and a photo of the whole item with your LL13 postcode.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
What else we do in Kings Mills
When a repair is not the answer
It helps to know what we can’t do:
- Leaks from fittings rather than the bath
- Holes rusted through the metal
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Never use suction bath mats
- Do not leave a chip unrepaired
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
About our accreditations · Every repair comes with a one-year guarantee.
