Wrexham · Wales

Bath re-enamelling & resurfacing in Little Mountain, Wrexham

Local bath re-enamelling for Little Mountain: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Little Mountain homes

Bath re-enamelling in Little Mountain, done in place

Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We’re often asked to fix lots of chips and rust spots and an original cast iron bath that needs restoring, on acrylic baths, cast iron baths and Victorian roll-tops.

All our work is covered by a one-year guarantee.

Technician in a mask working on a freestanding roll-top bath
Location
Little Mountain (LL11)
Area hub
Wrexham
Guarantee
One year on every repair
Quotes
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Repairs by material

Cast iron

Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

FAQs for Little Mountain

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Can you change the colour of my bath?

Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.

What areas do you cover?

Everywhere in the UK, Little Mountain included. There’s no extra charge for travel.

Will the bath be moved?

No. We resurface it in place, so the tiles and taps stay put.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can a failed resurfacing be redone?

Yes. Removing the old finish takes extra time, which we include in the price.

Do you work in Little Mountain?

We do. We send a technician to Little Mountain for every job, and the price is the same as everywhere else.

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes most of the day. We tidy up before we leave and let you know when you can use it again.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures until the following day.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Keep a parking space free if you can
  • Move bottles, mats and clutter away from the area

Get a quote

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Get a free quote

Read more

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in Wrexham and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Keeping it looking good

A little care keeps the finish looking good. We recommend:

  • Do not let dyes or oils sit on the finish
  • Do not use the bath until it has fully cured
  • Fix dripping taps quickly
  • Don’t leave bottles, razors or sponges standing on the surface

Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

About Little Mountain

Little Mountain is about 2 miles north-west of Wrexham, in Wrexham. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Little Mountain is one of 115 towns and villages in Wrexham we cover. Our nearest city page is Liverpool, about 24 miles away.

All of LL11 is covered, from the main roads to the quietest streets. From New Road, Moss Road and Mold Road or anywhere nearby, a technician can come to you. We also travel to Gwersyllt (1 mile north-east), Highfield (1 mile south), Pentre Broughton (1 mile west), Brynteg (1 mile south-west) and Rhosrobin (1 mile east). Within a short drive, we also cover Caia Park (3 miles south-east), Rhosllannerchrugog (4 miles south), The Dunks (3 miles south-east), Hightown (3 miles south-east), Pentredŵr (4 miles south) and Pant (5 miles south). Little Mountain is one of the larger places we cover in Wrexham.

Around Little Mountain

In Little Mountain, that means homes near Ysgol Bryn Alyn, Ysgol Bryn Alyn and Wheatsheaf Inn and the streets around them. Nearby too are Ysgol Heulfan (less than half a mile north) and Church of St Peter (under half a mile south-west). Little Mountain has its own railway station: Gwersyllt station. Further afield, we also cover the area around Football Museum of Wales and Wrexham Museum (1.8 miles south-east) and Cae Twmpath Fieldname 2 (1.4 miles south-west). Not far away are Cefn and Brymbo Pool.

Map of Little Mountain © OpenStreetMap contributors

Why repair rather than replace?

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Why book with us

  • We will tell you if it’s not worth repairing
  • Everything repaired in place
  • Same prices wherever you are
  • Colour mixed on the day to match

Take a look at our pricing or resurfacing vs replacement cost guide.

When a repair is not the answer

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • Steel that has corroded right through
  • Plumbing leaks, which need a plumber
  • A metal bath with a through crack

If in doubt, send photos and we will say what we think.

What we work on

  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths
  • Basins & shower trays

Do you need bath re-enamelling in Little Mountain?

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

The most common problems we’re called about are:

  • Chips and rust in more than one place
  • A roll-top that’s seen better days
  • A bath in a colour that no longer suits
  • Wear marks under the taps

What to look for in a quote

  • Whether the colour is mixed to match
  • Whether there are any call-out or travel charges
  • How long the guarantee is and what it covers
  • How your room will be protected

How to compare quotes

Prices and what affects them

Resurfacing from £350. Every quote is fixed and free. What we take into account:

  • The colour and finish to match
  • How many items we do on one visit
  • Any earlier repairs that need removing first
  • Access to the area

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Send photos for a quote

You can usually get a fixed quote without us visiting. To make it quick:

  • A clear, close picture of the problem area
  • Something in shot to show the size
  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.