Wrexham · Wales

Bath re-enamelling & resurfacing in Gwersyllt, Wrexham

Problem with your bath in Gwersyllt? We put it right where it is, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • A roll-top that’s seen better days
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Gwersyllt

Bath re-enamelling in Gwersyllt, done in place

A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for wear marks under the taps and a bath in a colour that no longer suits, on basins & shower trays, Victorian roll-tops and pressed steel baths.

Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.

Location
Gwersyllt (LL11)
County
Wrexham
Warranty
A year, on every repair
Price
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Landlord and trade work in Gwersyllt

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

If you manage property in Gwersyllt, we can repair and quote for several addresses together. Send photos for each one and we will price them together.

Gwersyllt: your questions answered

How long will the bath be out of use?

Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

Will the new finish last?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

Do the materials smell?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

Can you change the colour of my bath?

Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.

Can you repair something that’s been repaired before?

In most cases. The old repair comes out first, so let us know about it.

Can you do the outside of a roll-top?

Yes, frequently. We resurface the inside, and the outside can be refinished too.

Can you do more than one item on the same visit?

Of course, and it generally saves money. Just add the extra items to your pictures and we will quote them together.

The process

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes the best part of a day. If we find something your photos didn’t show, we will explain it before carrying on.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. The bath is left to cure and can usually be used the next day.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Let us know about parking or access
  • Keep children and pets away from the room on the day

Getting a price

There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Send photos for a quote

Read more

Repair or replace: which is better?

A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.

Why Gwersyllt customers choose us

  • We come to you, anywhere in the UK
  • CHAS, Constructionline and SafeContractor accredited
  • A fixed quote before you book
  • Colour mixed on the day to match

Take a look at our full price list and bath cost comparison.

Where we work around Gwersyllt

Gwersyllt is about 2 miles north-west of Wrexham, in Wrexham. Across the LL11 area, we come to you. Gwersyllt is one of 115 towns and villages in Wrexham where we work. We work right across the region, from Gwersyllt to Liverpool (23 miles away).

Here we cover the LL11 postcode area. Jobs here include addresses on High Street, Second Avenue and Greenwood Avenue and the roads around them. Nearby, we also work in Little Mountain (1 mile south-west), Highfield (1 mile south), Pentre Broughton (1 mile west), Rhosrobin (1 mile east) and Bradley (1 mile north-east). Further out, we also cover Caia Park (3 miles south-east), Rhosllannerchrugog (4 miles south), The Dunks (3 miles south-east), Hightown (3 miles south-east), Pentredŵr (5 miles south) and Pant (5 miles south). Being one of Wrexham’s larger places, Gwersyllt sees plenty of our work.

What’s near Gwersyllt

Typical jobs here are in homes near Ysgol Bryn Alyn, Ysgol Heulfan and Ysgol Bryn Alyn and the streets around them. Nearby too are Holy Trinity Church (under half a mile north) and Wheatsheaf Inn (under half a mile east). Gwersyllt has its own railway station: Gwersyllt station. Other landmarks nearby include Wrexham Maelor Hospital (1.8 miles south) and Football Museum of Wales and Wrexham Museum (2 miles south-east). Open spaces near Gwersyllt include Cefn and Brymbo Pool.

Map of Gwersyllt © OpenStreetMap contributors

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

What we’re called out for in Gwersyllt

In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.

These are the problems we’re asked about most:

  • Worn patches where water runs and sits
  • Brown or grey marks that don’t clean off
  • An old resurfacing that is failing
  • A bath in a colour that no longer suits

Comparing quotes

  • Whether the price covers travel
  • Whether a trained technician does the job
  • Is the price fixed, and does it include VAT?
  • What happens if the damage is worse than the pictures show

10 questions to ask before booking

When we would advise against a repair

We won’t take on work that won’t last, so here’s what a repair cannot put right:

  • An acrylic bath that flexes badly underfoot
  • Leaks from fittings rather than the bath
  • A metal bath with a through crack

If in doubt, send pictures and we’ll say what we think before you book.

Surfaces we repair

  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths

How we price bath re-enamelling

Prices start from £350. There’s no area surcharge for Gwersyllt. The price reflects:

  • What the surface is made of
  • Whether we combine several jobs
  • Any earlier repairs that need removing first
  • The colour and finish to match

What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.

How to get a fixed quote

You can take the pictures on your phone, there is no need for anything special. Ensure they show:

  • Whether it’s been repaired or coated before
  • The material, if you know it
  • A coin or ruler next to the damage for scale
  • A wider photo showing the entire bath

A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

Materials and what they mean for the repair

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.