Somerset · England
Bath re-enamelling & resurfacing in Kingsdon, Somerset
Problem with your bath in Kingsdon? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A coloured bath you want in white
About our bath re-enamelling in Kingsdon
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. If you are dealing with a coating lifting around the plughole and lots of chips and rust spots, we can help.
Whatever the size of the job, you get the same one-year guarantee in Kingsdon and across Somerset.
- Area
- Kingsdon (TA11)
- County
- Somerset
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, photos and access details.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Honest limits
A repair is not always the answer, and we’d rather say so up front. Repairs won’t solve:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
What happens on the day
Here’s how a visit usually runs: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow a full day. Before leaving, we tell you when it can be used and how to care for it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Open a window if you can
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Advice
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
FAQs for Kingsdon
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
How much does bath re-enamelling cost in Kingsdon?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Why repair rather than replace?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why Kingsdon clients choose us
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
- One price list for the whole UK
- No need to remove anything
See our full price list and resurfacing vs replacement cost guide.
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- Whether it’s a chip, crack, burn or wear
- The material and finish
- How many items we do on one visit
- The colour and finish to match
We charge the same wherever you are, so there is no premium for Kingsdon. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
Two or three clear photos are normally enough. Try to include:
- Any earlier repairs or coatings
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
Most customers in Kingsdon get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Nearby places to Kingsdon
Other services in Kingsdon
Covering Kingsdon
Kingsdon is about 6 miles north of Yeovil, in Somerset. Wherever you are in the TA11 postcode area, we come to you. We cover 640 places across Somerset.
We work across the TA11 postcode area and the streets around it. That includes homes on Middle Street, Mow Barton Road and Chapel Hill. Close by, we cover Charlton Mackrell (2 miles north-east), Ilchester (2 miles south), Podimore (2 miles south-east), Charlton Adam (2 miles north-east) and Yeovilton (3 miles south-east). We also work in nearby towns such as Bridgwater (15 miles north-west), Yeovil (6 miles south), Wells (12 miles north), Shepton Mallet (12 miles north-east), Street (7 miles north) and Glastonbury (8 miles north).
What’s near Kingsdon
In Kingsdon, that means homes near Church of All Saints and The Kingsdon Inn, among other places.
Signs you need bath re-enamelling in Kingsdon
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Customers normally contact us about:
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- Stains that will not shift
- A roll-top that’s seen better days
Comparing quotes
- Whether the colour is mixed to match
- What prep work is covered
- How long the guarantee is and what it covers
- How the room is protected while they work
About our accreditations · Every repair comes with a one-year guarantee.
