Somerset · England
Bath Re-enamelling in Steart
Damaged bath in Steart? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A dull, rough surface that will not come clean
Bath re-enamelling in Steart, done in place
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Our repair technicians work on pressed steel baths, cast iron baths and Victorian roll-tops, and people most frequently call us about brown or grey marks that don’t clean off and worn patches where water runs and sits.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Steart (TA11)
- County
- Somerset
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Steart
Steart is about 7 miles north of Yeovil, in Somerset. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Steart is one of 640 places in Somerset we cover.
Our visits in TA11 are booked in the same way as anywhere else. Other places close to Steart include Babcary (1 mile north), Charlton Adam (2 miles west), Podimore (2 miles south-west), Charlton Mackrell (2 miles west) and Keinton Mandeville (2 miles north-west). We also work in nearby towns such as Yeovil (7 miles south), Wells (11 miles north), Shepton Mallet (10 miles north), Street (7 miles north-west), Glastonbury (8 miles north-west) and Crewkerne (14 miles south-west).
Near you in Steart
Around Steart, we work in homes near Red Lion Inn and Church of the Holy Cross. Other landmarks nearby include Haynes Motor Museum (2.9 miles east).
When to call us in Steart
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
You may need us if you’ve spotted any of these:
- A coloured bath you want in white
- A roll-top that is seen better days
- Worn patches where water runs and sits
- Several chips and rust patches
What to look for in a quote
- Whether the colour is mixed to match
- Whether the price covers travel
- What preparation is included
- How to care for the finish
What happens on the day
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. Allow the best part of a day, and we will keep you posted as we go.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
More services for Steart
Steart: your questions answered
Do you cover the entire of Somerset?
The whole UK, including all of Somerset. Send your postcode with your photos and we’ll confirm dates.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
How much does bath re-enamelling cost in Steart?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up and a picture of the whole item with your TA11 postcode.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Repairing versus replacing in Steart
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
- No need to remove anything
- We come to you, anywhere in the UK
Read our pricing or bath cost comparison.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- Access to the area
- Whether we combine several jobs
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send photos for a quote
Phone pictures are fine, there’s no need for anything special. Just make sure we can see:
- Where you are, by postcode
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- One picture of the entire bath
If you’re in Steart and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
- Get any chip repaired quickly
- Dry the bath after use to stop limescale
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we will tell you honestly.
Materials we work on in Steart
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Landlord and trade work in Steart
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
If you manage property in Steart, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.
About our accreditations · Every repair comes with a one-year guarantee.
