Bath and North East Somerset · England
Bath re-enamelling & resurfacing in Kingsmead, Bath and North East Somerset
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Kingsmead. Send photos for a free, fixed quote.
- Resurfacing from £350
- An old resurfacing that’s failing
- A bath in a colour that no longer suits
What we are called out for in Kingsmead
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
The most common problems we’re called about are:
- A coating lifting around the plughole
- Chips and rust in more than one place
- Worn patches where water runs and sits
- Stains that won’t shift
What your quote should include
- How soon you can use it again
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
- What protection goes down before work starts
Bath re-enamelling in Kingsmead without replacing anything
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Whether it’s an old resurfacing that’s failing and a bath that stays dull however much you clean it, we can usually put it right, on Victorian roll-tops, basins & shower trays and acrylic baths alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Kingsmead (BA1, BA2)
- County
- Bath and North East Somerset
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Kingsmead and the surrounding area
Kingsmead is about 1 mile north-west of Bath, in Bath and North East Somerset. Clients in Kingsmead get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Kingsmead is one of 136 places in Bath and North East Somerset we cover. Our jobs stretch from Kingsmead to Birmingham (78 miles away).
Postcode districts we cover here: BA1 and BA2. You will find streets such as Brook Road, Lorne Road and Weston Road, and we cover them all. With the A4 and A36 close by, Kingsmead is easy for our repair technicians to reach. We also cover the places around Kingsmead: Lower Weston (1 mile west), Bath (1 mile south-east), Westmoreland (1 mile south-west), Locksbrook (1 mile west) and Lansdown (1 mile north-east). Larger places within reach include Keynsham (6 miles west), Paulton (8 miles south-west), Peasedown St John (5 miles south), Saltford (4 miles west), Batheaston (3 miles north-east) and Timsbury (6 miles south-west). Being one of Bath and North East Somerset’s larger places, Kingsmead sees plenty of our work.
Landmarks near Kingsmead
Locally, our jobs take us to homes close to Parade Gardens, Bath Royal Literary and Scientific Institution and City of Bath Technical School and the streets around them. Also close by are Hayesfield Girls School (0.7 miles south), Oldfield Park Infant School (under half a mile south), The Hop Pole Public House (less than half a mile south) and Bath Abbey (0.8 miles south-east). The nearest railway station is Oldfield Park station, about 0.5 miles south-west of the centre. A little further out are No. 1 Royal Crescent (under half a mile east) and Royal National Hospital for Rheumatic Diseases (0.7 miles north-west).
- Local churches include St John the Evangelist (less than half a mile west)
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Store bottles off the bath
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Kingsmead: your questions answered
What happens next?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
How do I get a price for bath re-enamelling in Kingsmead?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can you price it without visiting?
Generally, yes. Clear pictures let us give you a fixed price without visiting.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Bath and North East Somerset.
What areas do you cover?
The whole UK, including all of Bath and North East Somerset. Send your postcode with your photos and we’ll offer you dates.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Towns and villages near Kingsmead
More services for Kingsmead
Landlords, agents and businesses in Kingsmead
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Problems we cannot see until an old finish comes off
- A metal bath with a through crack
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer.
What we work on
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Prices and what affects them
Prices start from £350. There’s no area surcharge for Kingsmead. The price reflects:
- Where the damage is and how we get to it
- How many areas need work
- What the surface is made of
- The colour and finish to match
Our prices are the same across the UK, with no extra for Kingsmead. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Any details about the material
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
To get a price, send two or three photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
How it works
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a full day in most cases. The room is left tidy and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Clear the area around the damage
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
