Oxfordshire · England
Bath Re-enamelling for Kingston Lisle homes
Bath re-enamelling in and around Kingston Lisle: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which usually takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Ensure the room can be ventilated
Getting a price
Send us a photo of the damage and a wider shot of the entire item, and tell us you are in Kingston Lisle, and we’ll reply with a fixed price.
Read more
How we handle bath re-enamelling in Kingston Lisle
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We’re often asked to fix a peeling or bubbling previous coating and an original cast iron bath that needs restoring, across Victorian roll-tops, acrylic baths and basins & shower trays.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Kingston Lisle (OX12)
- County
- Oxfordshire
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Kingston Lisle
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Kingston Lisle.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Do you cover the whole of Oxfordshire?
All of Oxfordshire, and the rest of the UK. There is no extra charge for travel.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Places near Kingston Lisle
More services for Kingston Lisle
Our work in Kingston Lisle
Kingston Lisle is about 5 miles west of Wantage, in Oxfordshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in all 443 towns and villages in Oxfordshire, from the larger towns to small villages. Our nearest city page is London, about 62 miles away.
Every address in OX12 is covered, from the main roads to the quietest streets. Whether you live on Hill View, Drove Way and Fawler Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Westcot (1 mile east), Sparsholt (1 mile east), Woolstone (2 miles west), Upper Lambourn (5 miles south) and Sheepdrove (5 miles south). We also work in nearby towns such as Didcot (12 miles east), Abingdon-on-Thames (12 miles north-east), Witney (14 miles north), Carterton (13 miles north), Wantage (5 miles east) and Grove (5 miles east).
Near you in Kingston Lisle
Typical jobs here are in homes near Church of St John the Baptist, among other places. Other landmarks nearby include Faringdon Day Hospital (5.2 miles north-west) and Uffington Museum (1.7 miles north-west). Not far away are Whitehorse Hill and Seven Barrows.
What we are called out for in Kingston Lisle
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
Keep an eye out for any of the following:
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
What your quote should include
- How your room will be protected
- Who turns up on the day
- Is the price fixed, and does it include VAT?
- How long it needs to cure
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What affects the price in Kingston Lisle
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- The material and finish
- The type of damage
A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- One picture of the whole bath
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
To get a price, send two or three pictures through our quote form or call us. We will say immediately if a repair is the right fix.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- Most jobs done in one visit
- Work done at your home or business
Take a look at our pricing or bath cost comparison.
Keeping it looking good
Once the work has cured, treat it gently:
- Have chips seen to early
- Never use suction bath mats
- Wash away dyes and oils after use
- Repair dripping taps early
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Honest limits
We will not take on work that will not last, so these are the limits:
- A bath split right through the body
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
Send us pictures and we will tell you honestly.
Materials we work on in Kingston Lisle
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
