Nottingham · England
Bath Re-enamelling for Kingston on Soar homes
Damaged bath in Kingston on Soar? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- Several chips and rust patches
Bath re-enamelling in Kingston on Soar without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. We are often asked to fix a bath that stays dull however much you clean it and lots of chips and rust spots, on cast iron baths, acrylic baths and Victorian roll-tops.
A one-year guarantee comes as standard.
- Area
- Kingston on Soar (NG11)
- County
- Nottingham
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How hard the colour is to match
- Whether we combine several jobs
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
We charge the same wherever you are, with no extra for Kingston on Soar. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
You can take the photos on your phone. Just ensure we can see:
- A close-up of the damage, in focus
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Details of any past repairs
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- Nothing taken out or refitted
- One price list for the whole UK
- Colour-matched on site
- We’ll tell you if it’s not worth repairing
Read our prices page or bath cost comparison.
The process
Arrival times are agreed in advance, so you know when to expect us. On site, it takes the best part of a day. We leave the room clean.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
Read more
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
FAQs for Kingston on Soar
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do you work in Kingston on Soar?
Yes, we do. We send a technician to Kingston on Soar for every job, with no extra charge for travel.
How do I get a price for bath re-enamelling in Kingston on Soar?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you fix a peeling bath coating?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Kingston on Soar and nearby
Kingston on Soar is about 3 miles south of Long Eaton, in Nottingham. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Kingston on Soar is one of 51 towns and villages in Nottingham where we work. Our jobs stretch from Kingston on Soar to Birmingham (about 37 miles away).
Jobs in NG11 are booked in the same way as anywhere else. You’ll find streets such as Gotham Road and Kegworth Road, all of which we cover. Other places close to Kingston on Soar include Ratcliffe on Soar (1 mile north-west), New Kingston (1 mile north-east), Kegworth (1 mile south-west), West Leake (2 miles south-east) and Sutton Bonington (2 miles south). Within a short drive, we also cover Nottingham (9 miles north-east), Arnold (12 miles north-east), Bulwell (11 miles north), Sneinton (9 miles north-east), St Ann's (9 miles north-east) and Clifton (5 miles north-east).
Near you in Kingston on Soar
Around Kingston on Soar, we work in homes near St. Winifred's Church and Anchor Inn and the streets around them. The closest station to Kingston on Soar is East Midlands Parkway station, roughly 1.1 miles north of the centre. Well-known places in the area include Aston Hall Hospital (5.6 miles west) and Donington Castle (3.4 miles west). Not far away are Attenborough Nature Reserve.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Places near Kingston on Soar
Also in Kingston on Soar
Common problems we fix in Kingston on Soar
Many baths we resurface have simply been well used. The body of the bath is generally perfectly sound.
You may need us if you’ve spotted:
- Thin, worn enamel in places
- An old resurfacing that is failing
- Chips and rust in more than one place
- A dull, rough surface that won’t come clean
Before booking anyone
- What protection goes down before work starts
- How soon you can use it again
- What happens if the damage is worse than the pictures show
- A fixed price, and whether VAT is included
What a repair can’t fix
In fairness, there are a few things a repair won’t fix:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
