North Yorkshire · England
Bath re-enamelling & resurfacing in Kirby Hill, North Yorkshire
Fixed-price bath re-enamelling in Kirby Hill and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Stains that won’t shift
- A peeling or bubbling previous coating
Looking after it afterwards
To keep it looking its best for years:
- Wash away dyes and oils after use
- Store bottles off the bath
- Keep suction mats out of the bath
- Do not leave a chip unrepaired
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Bath re-enamelling in Kirby Hill, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with lots of chips and rust spots and brown or grey marks that don’t clean off, we can generally put it right, whatever the material.
All our work comes with a one-year guarantee, wherever you are in North Yorkshire.
- Location
- Kirby Hill (DL11)
- Area hub
- North Yorkshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Towns and villages near Kirby Hill
More services for Kirby Hill
What we do, step by step
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
How to get a price
If you are in Kirby Hill and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Do you need bath re-enamelling in Kirby Hill?
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is normally as strong as ever.
Typical reasons for a call-out include:
- A coating lifting around the plughole
- Enamel that is lost its shine and feels rough
- Wear marks under the taps
- Several chips and rust patches
Questions to ask before booking
- What happens if the damage is worse than the pictures show
- What the guarantee covers, and for how long
- Whether the colour is mixed to match
- What aftercare is recommended
Kirby Hill questions
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Can you do the outside of a roll-top?
Yes. Inside and out.
How much does bath re-enamelling cost in Kirby Hill?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we take into account:
- Whether we combine several jobs
- What the surface is made of
- Previous DIY repairs that have to come out
- The size and number of damaged areas
We charge the same wherever you are, so there’s no premium for Kirby Hill. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed quote
Two or three clear photos are generally enough. Try to include:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- Any details about the material
- Details of any past repairs
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Landlords, agents and businesses in Kirby Hill
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
About Kirby Hill
Kirby Hill is about 4 miles north-west of Richmond, in North Yorkshire. Across the DL11 area, we carry out the work at your property. We cover all 626 towns and villages in North Yorkshire. Our nearest city page is Newcastle upon Tyne, about 37 miles away.
Our visits in DL11 work the same way as everywhere else we cover. We also travel to Whashton (1 mile south-east), Gayles (1 mile north-west), Ravensworth (1 mile north), Dalton (2 miles north-west) and Hartforth (2 miles east). Larger places within reach include Catterick Garrison (6 miles south-east), Richmond (4 miles south-east), Colburn (6 miles south-east), Bedale (14 miles south-east), Aiskew (14 miles south-east) and Catterick (8 miles south-east).
What’s near Kirby Hill
Typical jobs here are in homes near Church of St Peter and St Felix and Ravensworth Church of England Primary School and the streets around them. A little further out are Ravensworth Castle (within half a mile north) and Georgian Theatre Royal Museum (3.9 miles south-east). Open spaces near Kirby Hill include Newsham Tarn.
- Other local spots include Kirkby Ravensworth (0.7 miles north-west)
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Kirby Hill
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
