North Yorkshire · England
Bath Re-enamelling for Whashton homes
Bath re-enamelling in Whashton without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- A peeling or bubbling previous coating

What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Bath re-enamelling in Whashton, done in place
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Typical jobs include a dull, rough surface that won’t come clean and a coating lifting around the plughole, in basins & shower trays, cast iron baths and pressed steel baths.
Big or small, it’s backed by a one-year guarantee.

- Location
- Whashton (DL11)
- Area hub
- North Yorkshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Whashton
Whashton is about 6 miles north-west of Catterick Garrison, in North Yorkshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Whashton is one of 626 places in North Yorkshire we cover. You can also see our page for Newcastle upon Tyne, about 38 miles away.
Our repair technicians cover all of DL11 and the streets around it. Nearby, we also work in Kirby Hill (1 mile north-west), Ravensworth (2 miles north), Hartforth (2 miles east), Gayles (2 miles north-west) and Gilling West (2 miles east). Larger places within reach include Catterick Garrison (6 miles south-east), Richmond (3 miles south-east), Colburn (6 miles south-east), Bedale (14 miles south-east), Aiskew (13 miles south-east) and Catterick (8 miles south-east).
Landmarks near Whashton
Typical jobs here are in homes near Ravensworth Church of England Primary School and Church of St Peter and St Felix and the streets around them. Further afield, we also cover the area around Victoria Hospital (3.3 miles south-east) and Ravensworth Castle (0.8 miles north-west). The countryside around Whashton includes Newsham Tarn.
- Other local spots include Kirkby Ravensworth (1.3 miles north-west)
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
- Make sure the room can be ventilated
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
Aftercare tips
Most damage we see is avoidable. These habits help:
- Wipe the bath dry after use in hard water areas
- Don’t use the bath until it has fully cured
- Rinse off hair dye, oils and bath bombs immediately
- Stick to gentle, non-abrasive cleaners
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Signs you need bath re-enamelling in Whashton
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The things clients generally mention when they call include:
- Lots of chips and rust spots
- A roll-top that is seen better days
- Thin, worn enamel in places
- Staining under the taps and around the waste
What to look for in a quote
- Whether they match the colour on site
- How soon you can use it again
- The length of the guarantee and what it covers
- What protection goes down before work starts
For landlords and businesses
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
If you manage property in Whashton, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
When a repair is not the answer
Before booking, it’s worth knowing the limits:
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Whashton: your questions answered
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Whashton.
Can you price it without visiting?
Typically, yes. Clear pictures let us give you a fixed price without visiting.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Towns and villages near Whashton
Also in Whashton
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job. What matters most is:
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- The material
- Access to the area
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Quotes from your photos
Phone photos are fine, there is no need for anything special. Just make sure we can see:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- One picture of the whole bath
- A coin or ruler next to the damage for scale
Email us a picture of the damage and one of the entire item, with your DL11 postcode, and we’ll reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.

