North Yorkshire · England
Bath re-enamelling & resurfacing in Kirby Hill, North Yorkshire
Damaged bath in Kirby Hill? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Thin, worn enamel in places
How we handle bath re-enamelling in Kirby Hill
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. If you are dealing with a bath that stays dull however much you clean it and an outdated colour you’d like to change, we can help, on Victorian roll-tops, pressed steel baths and cast iron baths alike.
Every repair comes with our one-year guarantee, wherever you are in North Yorkshire.
- Where
- Kirby Hill (YO51)
- Region
- North Yorkshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
The process
We agree an arrival time beforehand. Once we’re there, the work takes the best part of a day for most jobs. The room is left tidy.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep children and pets away from the room on the day
- Make sure the room can be ventilated
- Mention if the room is upstairs or in a flat
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Read more
Landlords, agents and businesses in Kirby Hill
If you manage property in Kirby Hill, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Why repair rather than replace?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the entire surface with the bath left where it is. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- One price list for the entire UK
- Everything repaired in place
- Free fixed quotes from pictures
- Work done at your home or business
Take a look at our prices page or guide to resurfacing and replacement costs.
Places near Kirby Hill
What else we do in Kirby Hill
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- Respect the curing time we give you
- Keep toiletries on a shelf rather than in the bath
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
When we would advise against a repair
We’d rather lose a job than do one that won’t last, so these are the limits:
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Prices and what affects them
Resurfacing from £350. There is no area surcharge for Kirby Hill. The price reflects:
- Where the damage is and how we get to it
- How much damage there is
- What kind of damage it is
- Previous DIY repairs that have to come out
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Send pictures for a quote
Before you send photos, a few simple things make all the difference:
- Daylight if possible, and no flash reflection
- Details of any past repairs
- Your postcode, so we can check dates
- Any details about the material
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Where we work around Kirby Hill
Kirby Hill is about 5 miles east of Ripon, in North Yorkshire. Across the YO51 area, we come to you. We cover all 626 towns and villages across North Yorkshire. Our jobs stretch from Kirby Hill to Leeds (22 miles away).
Every address in YO51 is within our area. That includes homes on All Saints Close, St John's Walk and Evesham Place. Neighbouring places we cover include Skelton on Ure (2 miles west), Marton-le-Moor (2 miles north-west), Dishforth (3 miles north), Bridge Hewick (4 miles north-west) and Copt Hewick (4 miles north-west). Within a short drive, we also cover Harrogate (10 miles south-west), Knaresborough (7 miles south), Ripon (5 miles west), Starbeck (9 miles south-west), Thirsk (9 miles north) and Bilton (9 miles south-west).
Landmarks near Kirby Hill
Locally, our jobs take us to homes close to Church of All Saints, The Anchor Inn and Kirby Hill Church of England Primary School and the streets around them. A little further out are Ripon Community Hospital (5.3 miles west) and Aldborough Roman Town (1.6 miles south-east).
FAQs for Kirby Hill
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
